1
/
of
2
GC-022 Frame-Exclusive Wide Swingarm, Monoshock, Triple Square, with Stabilizer, Buffed, +12cm for Monkey/Gorilla
GC-022 Frame-Exclusive Wide Swingarm, Monoshock, Triple Square, with Stabilizer, Buffed, +12cm for Monkey/Gorilla
SKU:gcr-90575
Regular price
¥75,102
Regular price
¥87,120
Sale price
¥75,102
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Ships in 2-6 business days
配送方法/参考送料:Courier delivery: shipping fee ¥698
752
points to be awarded
Couldn't load pickup availability
【G-Craft 90575 GC-022 Frame Only Wide Swingarm Monoshock Triple Square with Stabilizer Buff +12cm Monkey Gorilla】
GC-022 Frame Only S/A Wide +12cm T/S with Stabilizer
This swingarm is designed with a width of 187-190mm to allow the use of the stock Monkey hub.
The 39048 wide rear disc hub can also be used.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which adopts a lightweight and highly rigid "figure-of-eight cross-section," is a pipe that boasts over 80% support.
Exclusively designed for the GC-022 frame (39895).
When installing 8-4.0J, a 4mm offset sprocket is required for the front and a 4mm sprocket spacer for the rear.
When installing 10-4.0J, a front sprocket is not required as it can be offset on the engine side. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-022 aluminum frame)
Surface treatment: Buff finish
Size: +12cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (repair part number 691765)
Nut 1 (repair part number 65229)
Washer 2 (repair part number 65090/1 pc)
(3) Seat fixing collars 22mm 2 (repair part number 68133/1 pc)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (repair part number 38061)
(6) Axle collar 10mm 2 (repair part number 68134/1 pc)
(7) Axle nut M12 1 (repair part number 38001)
Notes
*T/S (Triple Square) and S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (+4cm or more is required)
*Chain sliders are pre-installed on both top and bottom.
*For NSR50/80 rear shocks only. (Ohlins TTX cannot be installed)
*The stabilizer is on the lower side.
*When using a disc brake, the brake stopper needs to be cut.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.
GC-022 Frame Only S/A Wide +12cm T/S with Stabilizer
This swingarm is designed with a width of 187-190mm to allow the use of the stock Monkey hub.
The 39048 wide rear disc hub can also be used.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which adopts a lightweight and highly rigid "figure-of-eight cross-section," is a pipe that boasts over 80% support.
Exclusively designed for the GC-022 frame (39895).
When installing 8-4.0J, a 4mm offset sprocket is required for the front and a 4mm sprocket spacer for the rear.
When installing 10-4.0J, a front sprocket is not required as it can be offset on the engine side. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-022 aluminum frame)
Surface treatment: Buff finish
Size: +12cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (repair part number 691765)
Nut 1 (repair part number 65229)
Washer 2 (repair part number 65090/1 pc)
(3) Seat fixing collars 22mm 2 (repair part number 68133/1 pc)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (repair part number 38061)
(6) Axle collar 10mm 2 (repair part number 68134/1 pc)
(7) Axle nut M12 1 (repair part number 38001)
Notes
*T/S (Triple Square) and S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (+4cm or more is required)
*Chain sliders are pre-installed on both top and bottom.
*For NSR50/80 rear shocks only. (Ohlins TTX cannot be installed)
*The stabilizer is on the lower side.
*When using a disc brake, the brake stopper needs to be cut.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.
適合車種の情報は現在登録されていません。
