Skip to product information
1 of 2

GC-022 Frame Specific Wide Swingarm, Monoshock, Triple Square, with Stabilizer, Buffed, +16cm, Monkey, Gorilla

GC-022 Frame Specific Wide Swingarm, Monoshock, Triple Square, with Stabilizer, Buffed, +16cm, Monkey, Gorilla

Gクラフト(G'craft)

SKU:gcr-90576

Regular price ¥75,102
Regular price ¥87,120 Sale price ¥75,102
Sale Sold out
Taxes included. Shipping calculated at checkout.
752 points to be awarded
【G-Craft 90576 GC-022 Frame Specific Wide Swingarm Monoshock Triple Square with Stabilizer Buff +16cm Monkey Gorilla】
GC-022 Frame Specific S/A Wide +16cm T/S with Stabilizer
This swingarm is designed with a width of 187-190mm so that the stock Monkey hub can be used as is.
The 39048 wide rear disc hub can also be used.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which adopts the lightweight and high-rigidity "cross-section" design, is a pipe that boasts over 80% support.
Exclusively designed for GC-022 frame (39895).
When installing 8-4.0J, a 4mm offset sprocket for the front and a 4mm sprocket spacer for the rear are required.
When installing 10-4.0, the front sprocket is not required as it can be offset on the engine side. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-022 aluminum frame)
Surface treatment: Buffed finish
Size: +16cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (Repair part number 691765)
Nut 1 (Repair part number 65229)
Washer 2 (Repair part number 65090/1 pc)
(3) Seat fixing collar 22mm 2 (Repair part number 68133/1 pc)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (Repair part number 38061)
(6) Axle collar 10mm 2 (Repair part number 68134/1 pc)
(7) Axle nut M12 1 (Repair part number 38001)
Notes
*T/S (Triple Square) and S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (Requires +4cm or more)
*Chain sliders are pre-installed on the top and bottom.
*Exclusively for NSR50/80 rear shocks. (Ohlins TTX cannot be installed)
*The stabilizer will be on the bottom.
*When using disc brakes, the brake stopper needs to be cut.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please be aware.

適合車種の情報は現在登録されていません。

View full details