Wide Swingarm for GC-019/GC-020 Frames, Monoshock, Standard, No Stabilizer, Buff Finish, +20cm, Monkey/Gorilla

【G-Craft 90617 GC-019/GC-020 Frame Only Wide Swingarm Monoshock Standard No Stabilizer Buffed +20cm Monkey Gorilla】
S/A Wide +20cm STD No Stabilizer for GC-019, GC-020 frames
The wide swingarm for GC-019 and GC-020 aluminum frames is manufactured with the same width as the Monkey wide swingarm (width 187-190mm).
It can use the genuine Monkey hub as is, or the 39048 wide rear disc hub.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which uses a strong "I-beam cross-section," is a pipe that boasts over 80% support from users who choose 16cm or more.
When installing 8-4.0J, a 4mm offset sprocket is required for the front and a 4mm sprocket spacer for the rear.
When installing 10-4.0, the front sprocket is not required as it can be offset on the engine side. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-019, GC-020 aluminum frames)
Surface treatment: Buffed finish
Size: +20cm
Material: 7N01, A5083 material used
Included accessories
(1) Chain adjuster 1 set (specific for each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (Repair part number 65235)
Nut 1 (Repair part number 65229)
Washer 2 (Repair part number 65090/1 pc per pack)
(3) Seat fixing collar 22mm 2 (Repair part number 68133/1 pc per pack)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (Repair part number 38061)
(6) Axle collar 10mm 2 (Repair part number 68134/1 pc per pack)
(7) Axle nut M12 1 (Repair part number 38001)
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (+4cm or more is required)
*Only triple square pipes have chain sliders on the bottom as well.
*Please use genuine NSR50/80 rear shocks. (Ohlins TTX cannot be installed)
*The basic stabilizer will be on the bottom side.
*Exclusively for GC-019, GC-020 aluminum frames. Other frames cannot be installed.
*When using a disc brake, the brake stopper needs to be cut. (Cut 10mm from the tip)
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.