GC-019/GC-020 Frame Only Wide Swingarm Monoshock Standard Stabilizer Buff +14cm Monkey Gorilla

【G-Craft 90619 GC-019/GC-020 Frame Only Wide Swingarm Monoshock Standard with Stabilizer Buffed +14cm Monkey Gorilla】
For GC-019, GC-020 frames only, S/A Wide +14cm STD with Stabilizer
The wide swingarm for GC-019 and GC-020 aluminum frames is manufactured with the same width as the Monkey wide swingarm (width 187-190mm).
You can use the genuine Monkey hub as is, or use the 39048 wide rear disc hub.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which employs a strong "box-section" profile, is supported by over 80% of users who choose 16cm or longer.
When installing 8-4.0J, a 4mm offset sprocket is required for the front, and a 4mm sprocket spacer is required for the rear.
When installing 10-4.0, the offset can be done on the engine side, so a front sprocket is not required. (If using a normal hub, an 8mm offset sprocket spacer is required).
Compatible models
Monkey, Gorilla (for GC-019, GC-020 aluminum frames)
Surface treatment: Buffed finish
Size: +14cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (repair part number 65235)
Nut 1 (repair part number 65229)
Washer 2 (repair part number 65090/1 piece)
(3) Seat fixing collar 22mm 2 (repair part number 68133/1 piece)
(4) Drum brake rod 1 (depending on swingarm length)
(5) Axle shaft 230mm 1 (repair part number 38061)
(6) Axle collar 10mm 2 (repair part number 68134/1 piece)
(7) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8 inches 4.0J and 10 inches 4.0J can be installed. (Requires +4cm or more)
*Only triple square pipes have chain sliders on the bottom as well.
*Please use genuine NSR50/80 rear shocks. (Ohlins TTX cannot be installed)
*The basic stabilizer will be on the bottom.
*Exclusively for GC-019 and GC-020 aluminum frames. Other frames cannot be installed.
*When using a disc, the brake stopper needs to be cut. (Cut 10mm from the tip)
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.