GC-019/GC-020 Frame Only Wide Swingarm Monoshock Triple Square with Stabilizer Buff +20cm Monkey Gorilla

【G-Craft 90629 GC-019/GC-020 Frame-Specific Wide Swingarm Monoshock Triple Square with Stabilizer Buff +20cm Monkey Gorilla】
GC-019, GC-020 Frame-Specific S/A Wide +20cm T/S with Stabilizer
The wide swingarm for GC-019 and GC-020 aluminum frames is manufactured with the same width as the Monkey wide swingarm (width 187-190mm).
You can use the stock Monkey hub as is, or use the 39048 wide rear disc hub.
This swingarm is compatible with both drum and disc brakes.
The triple square pipe swingarm, which uses a strong "I-beam cross-section," is favored by over 80% of users who choose 16cm or longer.
When installing an 8-4.0J wheel, a 4mm offset front sprocket and a 4mm rear sprocket spacer are required.
When installing a 10-4.0 wheel, the offset can be done on the engine side, so a front sprocket is not required. (If using a normal hub, an 8mm offset sprocket spacer is required)
Compatible models
Monkey, Gorilla (for GC-019, GC-020 aluminum frames)
Surface treatment: Buff finish
Size: +20cm
Material: 7N01, A5083 material used
Accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Shock mounting bolt set
Bolt 1 (repair part number 65235)
Nut 1 (repair part number 65229)
Washer 2 (repair part number 65090/1 pc per pack)
(3) Seat fixing collar 22mm 2 (repair part number 68133/1 pc per pack)
(4) Drum brake rod 1 (according to swingarm length)
(5) Axle shaft 230mm 1 (repair part number 38061)
(6) Axle collar 10mm 2 (repair part number 68134/1 pc per pack)
(7) Axle nut M12 1 (repair part number 38001)
Notes
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*Up to 8-inch 4.0J and 10-inch 4.0J can be installed. (+4cm or more is required)
*Only triple square pipes have chain sliders on the bottom as well.
*Please use genuine NSR50/80 rear shocks. (Ohlins TTX cannot be installed)
*The basic stabilizer is on the bottom.
*Exclusively for GC-019 and GC-020 aluminum frames. Not compatible with other frames.
*When using disc brakes, the brake stopper needs to be cut. (Cut 10mm from the tip)
*The image is for illustration purposes, and the design and specifications of the products shown are subject to change without notice. Please be aware.