Super Wide Swingarm, Low-Cost Twin Shock, Standard, Stabilized, Buffed, +4cm for Monkey Gorilla

【G-Craft 90662 Super Wide Swingarm Low Cost Twin Shock Standard with Stabilizer Buff +4cm Monkey Gorilla】
Monkey Super Wide S/A Low Cost STD Twin +4cm with Stabilizer
This swingarm is the widest available for the Monkey (207-210mm), allowing the installation of 5.5J wide wheels. Compared to the genuine Monkey swingarm (167-170mm wide), it is 20mm wider on each side.
By installing a 20mm sprocket spacer (part number 39419), you can use the genuine Monkey hub or a wide disc rear hub. This swingarm is compatible with both drum and disc brakes.
Two types are available: one that uses the 30047 Super Wide Shock Mount, and a low-cost type that does not use a shock mount.
■When changing from drum to disc specifications■
Specifications can be changed by cutting the brake stopper.
Compatible models
Monkey, Gorilla
Surface treatment: Buff finish
Size: +4cm
Material: 7N01, A5083 material used
Included accessories
(1) Chain adjuster block 1 set (specific to each pipe shape)
(2) Twin shock mount bolts 1 set
(3) Drum brake rod 1 (depending on swingarm length)
(4) Axle shaft 250mm 1 (repair part number 38053)
(5) Axle collar 20mm 1 (repair part number 394216)
(6) Axle nut M12 1 (repair part number 38001)
Precautions
*STD (Standard), T/S (Triple Square), T/S Mini (Triple Square Mini), S/A (Swingarm) are abbreviations.
*To prevent interference between the side stand and the stabilizer, the 30102 Stand Holder Type 2 is required for swingarms with stabilizers.
*Only Triple Square pipes have chain sliders on the bottom.
*The low-cost type shock mount is approximately 30mm higher than the standard twin shock type.
*Due to individual differences between vehicles, the brake switch stay may interfere. In such cases, bend the brake switch stay to secure the necessary clearance before installation.
*Triple Square models come standard with bearings at the pivot section.
*If a stabilizer is added, installation of stand hook Type-2 (60903) is not possible.
*For +4cm, the stabilizer add-on option is not available.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.