CBR1000F Mesh Brake Hose Master Cylinder Set Front CBR1000F 89-92

【CBR1000F Mesh Brake Hose Master Cylinder Set Front CBR1000F 89-92 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose as a set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, reducing brake pedal play, making speed control easier, and shortening braking distances.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts may vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Choice of clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handle outer diameter Φ22.2 only.
Never use any lever other than the specified one.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air entrapment.
Please refer to the main unit dimension diagram and make sure there is sufficient installation space.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(*Fluid degradation progresses even during storage.)
If there is too much moisture in the brake fluid, it can boil easily due to the heat generated during braking, rust components in the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement is required every two years under normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selectable Manufacturer Part Numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 74755 (Round Integral 1/2 inch Black/Buff Clear/Clear Tank)

Compatible models: CBR1000F (Model year 89-92)

Installation details: Front (2 lines)

Always inquire before ordering and confirm on the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be out of stock or discontinued due to manufacturer backorder.
Please confirm the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.