1 4

CB750F Mesh Brake Hose Master Cylinder Set

CB750F Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

h3004-fwd121-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
Model number
カラー(シリンダー/レバー/タンク)
長さ
【CB750F Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose CB750F '79~'84 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose.
Since it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, making speed control easier and shortening the braking distance.
As this is a custom part, the routing and length may differ from the genuine parts.
The images are for illustrative purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some of the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified lever.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air locks.
Please refer to the main body dimension diagram and make sure there is sufficient installation space.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates with long-term use.
(Note: Fluid deterioration also progresses during storage.)
If the amount of water in the brake fluid increases, it may boil easily due to the heat generated during braking, or it may rust components in the hydraulic system, potentially leading to a decrease in brake or clutch performance or unexpected problems.
Regular replacement is required every two years with normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible models: CB750F (model year 79-81, model RC04)

Installation details: Front (2 hoses)

Please be sure to inquire before ordering or check the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or out of stock from the manufacturer.
Please check the size and design before ordering.
Due to the environment of your PC or mobile phone, the color of the product in the image may differ slightly.

適合車種の情報は現在登録されていません。

View full details