CB750 Mesh Brake Hose and Master Cylinder Set, Front, CB750 92-08 RC42/BC-RC42

【CB750 Mesh Brake Hose Master Cylinder Set Front CB750 92-08 RC42/BC-RC42 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose.
Since it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
Since these are custom parts, the routing and length may differ from the genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension diagram and ensure that sufficient installation space is secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates over long periods of use.
(Note: Fluid deterioration progresses even during storage.)
If there is too much moisture in the brake fluid, it can easily boil due to heat during braking, corrode components within the hydraulic system, and potentially lead to reduced braking or clutch performance and unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of brake fluid will be necessary.

Please be sure to check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 74755 (Round Integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible models: CB750 (Model Year 92-08, Model RC42/Model BC-RC42)

Installation details: Front (2 lines)

Please be sure to inquire before ordering, and check with the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or discontinued.
Please be sure to check the size and design before ordering.
The color of the product image may differ slightly from the actual product depending on your PC or mobile phone environment.