GB400 Mesh Brake Hose Master Cylinder Set Front GB400 85 NC20

【GB400 Mesh Brake Hose Master Cylinder Set Front GB400 85 NC20 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose as a set.
As it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Choice of clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handle outer diameter Φ22.2.
Never use any lever other than the specified one.
Please note that overtightening the air bleeder may crush the bleeder hole or tip, causing fluid leaks or air lock.
Please refer to the main body dimension diagram and ensure that sufficient installation space can be secured.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates over long periods of use.
(Even in storage, fluid deterioration progresses.)
When there is too much moisture in the brake fluid, it can easily boil due to the heat generated during braking, rust components within the hydraulic system, and potentially lead to reduced braking or clutch performance or unexpected problems.
Regular replacement every two years is necessary for normal use.
If significant deterioration is observed, early replacement of the brake fluid is required.

Please always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 74755 (Round integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible vehicles: GB400 (model year 85, model NC20)

Installation details: Front (1 piece)

Please inquire and check on the manufacturer's website before ordering.
For detailed information about the product, please check the manufacturer's website.
Some products may be out of stock or discontinued due to manufacturer取り寄せ.
Please check the size and design before ordering.
The color of the product image may differ slightly from the actual product due to the environment of your PC or mobile phone.