CBR400R Mesh Brake Hose Master Cylinder Set Front CBR400R '13 EBL-NC47

【CBR400R Mesh Brake Hose Master Cylinder Set Front CBR400R ‘13 EBL-NC47 Vertex】
This great value product is a set of Nissin master cylinder and brake hose.
Since it's a vehicle-specific set, it can be installed if it's a compatible vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces brake pedal play, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Choice of clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum)

Clamp holder has a mirror hole (M10×P1.25 standard thread included).
Exclusively for handle outer diameter Φ22.2.
Never use any lever other than the specified one.
Please note that overtightening the air bleeder can crush the bleeder hole or tip, causing fluid leaks or air entrapment.
Please refer to the main body dimension diagram and ensure sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates with long-term use.
(※Fluid deterioration also progresses during storage.)
If there is too much moisture in the brake fluid, it can boil easily due to heat during braking, corrode components in the hydraulic system, and lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every 2 years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selectable manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 74755 (Round Integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible models: CBR400R (Year '13, Model EBL-NC47)

Installation details: Front (1 hose)

Please inquire before ordering or check on the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered from the manufacturer or out of stock.
Please confirm the size and design before ordering.
Due to your PC or mobile phone environment, the color of the product in the image may differ slightly.