400X Mesh Brake Hose Master Cylinder Set Front 400X 13 EBL-NC47

【400X Mesh Brake Hose Master Cylinder Set Front 400X 13 EBL-NC47 Vertex】
This is a great value product that includes a Nissin master cylinder and a brake hose set.
Since it is a vehicle-specific set, it can be installed if it is a compatible vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, allows for easier speed control, and shortens braking distance.
As this is a custom part, routing and length may differ from genuine parts.
Images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be purchased separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) available for selection

Clamp holder with mirror hole (M10×P1.25 right-hand thread included).
Exclusively for handlebar outer diameter Φ22.2.
Never use levers other than the specified one.
Please note that overtightening the air bleeder can crush the bleeder hole or tip, leading to fluid leaks or air lock.
Please refer to the main body dimension drawing and make sure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(Even in storage, fluid deterioration progresses.)
When there is too much moisture in the brake fluid, it becomes more prone to boiling due to heat during braking, can rust components in the hydraulic system, and may lead to reduced brake or clutch performance or unexpected problems.
Regular replacement is required every 2 years for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 61739 (horizontal type 1/2 inch silver/buff clear/clear tank)
Daytona 61742 (horizontal type 1/2 inch black/buff clear/clear tank)
Daytona 61758 (horizontal type 1/2 inch black/black/clear tank)
Daytona 74755 (round integrated type 1/2 inch black/buff clear/clear tank)

Compatible vehicles: 400X (year 13, model EBL-NC47)

Installation details: Front (1 hose)

Please be sure to inquire before ordering, and confirm on the manufacturer's website or similar.
For detailed information on the product, please check the manufacturer's website.
Some products may be back-ordered from the manufacturer and out of production, or out of stock.
Please be sure to check the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.