GB250 Mesh Brake Hose Master Cylinder Set Front GB250 95-00 MC10

【GB250 Mesh Brake Hose Master Cylinder Set Front GB250 95-00 MC10 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As this is a custom part, the routing and length may differ from the genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts vary depending on the vehicle model.
Please provide brake fluid separately.

Hose details: Choice of clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum)

Clamp holder with mirror hole (M10 x P1.25 right-hand thread included)
Exclusively for handlebars with an outer diameter of Φ22.2.
Never use any lever other than the specified one.
Please be aware that overtightening the air bleeder can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension drawing and confirm that sufficient installation space can be secured.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(Even when stored, fluid deterioration progresses.)
If the amount of moisture in the brake fluid increases, it can easily boil due to the heat generated during braking, rust components in the hydraulic system, and lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Always check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 26854 (Horizontal 11mm Silver/Buff Clear/Clear Tank Short Lever)
Daytona 49016 (Horizontal 11mm Black/Buff Clear/Clear Tank Short Lever)
Daytona 43337 (Horizontal 11mm Black/Black/Clear Tank Short Lever)
Daytona 78593 (Horizontal 11mm Black/Buff Clear/Clear Tank)
Daytona 78594 (Horizontal 11mm Black/Black/Clear Tank)

Compatible models: GB250 (Model year 95-00, Model type MC10)

Installation details: Front (1 piece)

Always inquire before ordering, and confirm on the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered by the manufacturer and discontinued or out of stock.
Please confirm the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.