1 6

VT250 Mesh Brake Hose Master Cylinder Set Front VT250 '84-85 MC08/'86 MC15

VT250 Mesh Brake Hose Master Cylinder Set Front VT250 '84-85 MC08/'86 MC15

バーテックス(VERTEX)

h3105-fsd121-10-d14

¥15,990
¥15,990
Sale Sold out
Taxes included. Shipping calculated at checkout.
160 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Hose color & length
【VT250 Mesh Brake Hose Master Cylinder Set Front VT250 '84-85 MC08/'86 MC15 Vertex】
This great value product comes with a Nissin master cylinder and a brake hose set.
Since it is a vehicle-specific set, it can be installed if it matches your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, allows for easier speed control, and shortens the braking distance.
As this is a custom part, the routing and length may differ from the genuine product.
The images are for illustration purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that cannot be selected cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Choice of clear hose, blue/red (aluminum) or smoked hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handlebars with an outer diameter of Φ22.2.
Absolutely do not use levers other than the specified ones.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air to become trapped.
Please refer to the main body dimension diagram and make sure there is sufficient installation space.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air due to long-term use.
(*Fluid degradation progresses even during storage.)
If the amount of moisture in the brake fluid increases, it can easily boil due to the heat generated during braking, or rust components in the hydraulic system, potentially leading to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 26853 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank Short Lever)
Daytona 49017 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank Short Lever)
Daytona 43336 (Horizontal 1/2 inch Black/Black/Clear Tank Short Lever)
Daytona 74755 (Round Integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible models: VT250 (Model Year '86, Model MC15) (Model Year '84-85, Model MC08)

Installation details: Front (1 piece)

Please be sure to inquire before ordering, and check the manufacturer's website or other sources.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or out of stock due to manufacturer availability.
Please be sure to confirm the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details