FTR250 Mesh Brake Hose Master Cylinder Set Front FTR250 ‘86 MD17

【FTR250 Mesh Brake Hose Master Cylinder Set Front FTR250 '86 MD17 Vertex】
This great value product comes as a set with a Nissin master cylinder and brake hose.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air entrapment.
Please refer to the body dimension diagram and make sure there is sufficient installation space.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(※Fluid deterioration also progresses even when stored.)
If there is too much moisture in the brake fluid, it may boil easily due to the heat during braking, corrode components in the hydraulic system, and lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selected manufacturer part numbers:
Daytona 26854 (Horizontal 11mm Silver/Buff Clear/Clear Tank Short Lever)
Daytona 49016 (Horizontal 11mm Black/Buff Clear/Clear Tank Short Lever)
Daytona 43337 (Horizontal 11mm Black/Black/Clear Tank Short Lever)
Daytona 78593 (Horizontal 11mm Black/Buff Clear/Clear Tank)
Daytona 78594 (Horizontal 11mm Black/Black/Clear Tank)

Compatible models: FTR250 (Year '86, Model MD17)

Installation details: Front (1 piece)

Please be sure to inquire or check on the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or discontinued by the manufacturer.
Please confirm the size and design before placing your order.
The color of the product image may differ slightly from the actual product due to your PC or mobile phone environment.