1 6

XR250 Mesh Brake Hose Master Cylinder Set Front XR250 95-07 MD30/BA-MD30

XR250 Mesh Brake Hose Master Cylinder Set Front XR250 95-07 MD30/BA-MD30

バーテックス(VERTEX)

h3142-fsd121-10-d13

¥16,902
¥16,902
Sale Sold out
Taxes included. Shipping calculated at checkout.
170 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Hose color & length
【XR250 Mesh Brake Hose Master Cylinder Set Front XR250 95-07 MD30/BA-MD30 Vertex】
This is a great value product that comes with a Nissin master cylinder and brake hose as a set.
Since it's a vehicle-specific set, it can be installed if it matches your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As this is a custom part, the routing and length may differ from the genuine product.
Images are for illustration purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection.

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handlebars with an outer diameter of Φ22.2.
Never use any lever other than the specified one.
Please note that overtightening the air bleeder may crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension diagram and make sure there is sufficient installation space.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air with long-term use.
(Even in storage, fluid degradation progresses.)
If there is too much moisture in the brake fluid, it may boil easily due to the heat generated during braking, rust components within the hydraulic system, and potentially lead to decreased brake or clutch performance or unexpected problems.
Regular replacement is required every two years under normal use.
If significant degradation is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual on the manufacturer's website (Daytona) for the master cylinder you plan to purchase in advance.

Selectable manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 26853 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank Short Lever)
Daytona 49017 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank Short Lever)
Daytona 43336 (Horizontal 1/2 inch Black/Black/Clear Tank Short Lever)
Daytona 74755 (Round Integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible models: XR250 (Model Year 95-99, Model MD30) (Model Year 00-07, Model BA-MD30)

Installation details: Front (1 piece)

Please inquire and confirm on the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be out of production or out of stock due to manufacturer backorder.
Please check the size and design before ordering.
The color of the product in the image may differ slightly depending on your PC or mobile phone environment.

適合車種の情報は現在登録されていません。

View full details