1 6

XR50 Motard Mesh Brake Hose Master Cylinder Set Front XR50 Motard 05-07 BA-AD14

XR50 Motard Mesh Brake Hose Master Cylinder Set Front XR50 Motard 05-07 BA-AD14

バーテックス(VERTEX)

h3149-fsd121-10-d13

¥15,990
¥15,990
Sale Sold out
Taxes included. Shipping calculated at checkout.
160 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Hose color & length
【XR50 Motard Mesh Brake Hose Master Cylinder Set Front XR50 Motard 05-07 BA-AD14 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose as a set.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, reducing brake pedal play, making speed control easier, and shortening the braking distance.
As this is a custom part, the routing and length may differ from the genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts may vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection

Clamp holder has a mirror hole (M10 x P1.25 right-hand thread included)
Exclusively for handlebar outer diameter Φ22.2.
Never use any lever other than the specified one.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leaks or air locking.
Please refer to the body dimension diagram and ensure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates over long periods of use.
(Note: Fluid deterioration progresses even when stored.)
When the moisture content in the brake fluid increases, it can easily boil due to the heat generated during braking, corrode components in the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 26853 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank Short Lever)
Daytona 49017 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank Short Lever)
Daytona 43336 (Horizontal 1/2 inch Black/Black/Clear Tank Short Lever)
Daytona 74755 (Round Integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible models: XR50 Motard (Year 05-07, Model BA-AD14)

Installation details: Front (1 piece)

Please be sure to inquire before ordering and check with the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be backordered, discontinued, or out of stock.
Please confirm the size and design before ordering.
The color of the product image may differ slightly depending on the environment of your PC or mobile phone.

適合モデルには複数の年式・型式がある場合があります。

ホンダ ホンダの適合モデル
XR50モタード
XR50モタード 年式 : 2005
備考　AD14
XR50モタード 年式 : 2006
備考　AD14
XR50モタード 年式 : 2007
備考　AD14
> XR50モタードのカスタムパーツを探す
XR100モタード
XR100モタード 年式 : 2005～2008
備考　BC-HD13
> XR100モタードのカスタムパーツを探す
View full details