NC750S Mesh Brake Hose Master Cylinder Set Front NC750S '14 EBL-RC70

【NC750S Mesh Brake Hose Master Cylinder Set Front NC750S ‘14 EBL-RC70 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
As it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces brake pedal play, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
Images are for illustration purposes only.
Depending on the vehicle, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be purchased separately.

Hose details: Clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum) selection

The clamp holder has a mirror hole (M10×P1.25 right-hand thread included).
Exclusively for handle outer diameter Φ22.2.
Never use any lever other than the specified one.
Please note that if the air bleeder is overtightened, the bleeder hole or tip may be crushed, causing fluid leakage or air lock.
Please refer to the body dimension diagram and confirm that sufficient installation space can be secured.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates with long-term use.
(*Fluid deterioration progresses even in storage.)
If the moisture content in the brake fluid increases, it may boil easily due to the heat generated during braking, rust components within the hydraulic system, and potentially lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required with normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 78593 (Horizontal type 11mm black/buff clear/clear tank)
Daytona 78594 (Horizontal type 11mm black/black/clear tank)

Compatible vehicles: NC750S (model year '14, model EBL-RC70)

Installation details: Front (1 hose)

Please be sure to inquire before ordering, or check on the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered from the manufacturer and discontinued, or out of stock.
Please be sure to check the size and design before ordering.
The color of the product image may differ slightly from the actual product due to your PC or mobile phone environment.