1 4

CB400SF REVO Mesh Brake Hose Master Cylinder Set

CB400SF REVO Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

h3158-ft2121-10-d1

¥31,040
¥31,040
Sale Sold out
Taxes included. Shipping calculated at checkout.
311 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Length
【CB400SF Mesh Brake Hose Rear Clear Hose Smoke Hose Mesh Brake Hose CB400SF REVO 08-13 (ABS not compatible) Vertex】
This is a great value product set that includes a Nissin master cylinder and brake hose.
As it is a vehicle-specific set, it can be installed if it matches your vehicle.

Mesh hoses play a role in preventing expansion compared to rubber hoses, thereby reducing brake pedal play, making speed control easier, and shortening the braking distance.
As these are custom parts, the routing and length may differ from the genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, some master cylinder colors or types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be prepared separately.

Hose details: Clear hose, blue/red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air locking.
Please refer to the main body dimension drawing and ensure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air over long periods of use.
(Note: Fluid degradation progresses even during storage.)
If the moisture content in the brake fluid increases, it can easily boil due to the heat during braking, corrode components within the hydraulic system, and potentially lead to reduced performance or unexpected problems with the brake or clutch.
Regular replacement every two years is required for normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible model: CB400SF REVO (Model year 08-13, Model EBL-NC42) *ABS not compatible

Installation details: Front (3 hoses)

Always inquire before ordering and confirm on the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered by the manufacturer, discontinued, or out of stock.
Please be sure to confirm the size and design before ordering.
The color of the image may differ slightly from the actual product depending on your PC or mobile phone environment.

適合車種の情報は現在登録されていません。

View full details