ZX-10 Mesh Clutch Hose Master Cylinder Set

【ZX-10 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose ZX-10 88-90 Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose.
As it is a model-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces brake pedal play, allows for easier speed control, and shortens braking distance.
As these are custom parts, routing and length may differ from genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets without a selection cannot be sold.
Actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, blue/red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handle outer diameter Φ22.2.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension diagram and ensure that sufficient installation space is available.

◆ About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air with prolonged use.
(Note: Fluid degradation progresses even in storage.)
If there is too much moisture in the brake fluid, it can boil more easily from the heat during braking, corrode components in the hydraulic system, and lead to reduced brake or clutch performance or unexpected problems.
Regular replacement is required every two years under normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual on the manufacturer's website (Daytona) for the master cylinder you plan to purchase in advance.

Selected manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible models: ZX-10 (Year 88-90, Overseas model type)

Installation details: Clutch (1 piece)

Please be sure to inquire before ordering, and check with the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock due to manufacturer availability.
Please be sure to check the size and design before ordering.
The color of the product image may differ slightly from the actual product depending on the PC or mobile phone environment you are using.