GPZ1100 Dark Mesh Clutch Hose & Master Cylinder Set

【GPZ1100 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose GPZ1100 95- Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose.
As this is a vehicle-specific set, it can be installed if it matches your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
Since these are custom parts, the routing, length, etc., may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Smoke hose, black/black (aluminum)

Clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use levers other than the specified ones.
Please be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, causing fluid leakage or air lock.
Please refer to the body dimension diagram and ensure that sufficient installation space can be secured.

◆ About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid absorbs moisture from the air and deteriorates with prolonged use.
(*Fluid deterioration progresses even during storage.)
If the moisture content in the brake fluid increases, it can easily boil due to the heat during braking, rust components within the hydraulic system, and potentially lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required under normal use.
If significant deterioration is observed, early replacement of the brake fluid is necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible model: GPZ1100 (Year 95-00, Model ZXT10E)

Installation details: Clutch (1 piece)

Please inquire and check on the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be backordered or out of stock from the manufacturer.
Please confirm the size and design before ordering.
The color of the product image may differ slightly from the actual product due to the environment of your PC or mobile phone.