1 4

Z750FX Mesh Brake Hose and Master Cylinder Set

Z750FX Mesh Brake Hose and Master Cylinder Set

バーテックス(VERTEX)

k3015-fwd121-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Length
【Z750FX Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose Z750FX Type 2/3 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose set.
Since it's a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, reducing brake pedal play, making speed control easier, and shortening braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
Images are for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual attached parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, Blue/Red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handlebars with an outer diameter of Φ22.2.
Never use any lever other than the specified one.
If the air bleeder is tightened with excessive torque, the bleeder hole or tip may be crushed, causing fluid leaks or air entrapment, so please be careful.
Please refer to the main unit dimension diagram and make sure there is sufficient installation space.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(*Degradation of fluid also progresses during storage.)
If the moisture content in the brake fluid increases, it can easily boil due to heat during braking, corrode components within the hydraulic system, and lead to reduced brake or clutch performance and unexpected problems.
Regular replacement every two years is required for normal use.
If significant degradation is observed, early replacement of the brake fluid is necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selectable manufacturer part numbers:
Daytona 79882 (Vertical type φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical type φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical type φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical type φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical type φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical type φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical type φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal type 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal type 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal type 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal type 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal type 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal type φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated type 5/8 inch Black/Buff Clear/Clear Tank)

Compatible vehicles: Z750FX Type 2/3

Installation details: Front (2 hoses)

Please inquire in advance or check the manufacturer's website before ordering.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock.
Please confirm the size and design before ordering.
The color of the product image may differ slightly from the actual product due to your PC or mobile phone environment.

適合車種の情報は現在登録されていません。

View full details