ZZR1100 Dark Mesh Clutch Hose Master Cylinder Set

【ZZR1100 Mesh Clutch Hose Master Cylinder Brake Hose ZZR1100 93-01 Overseas Model Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose.
As it is a model-specific set, it can be installed if it matches your vehicle.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, allowing for easier speed control and shorter braking distances.
As these are custom parts, the routing and length may differ from genuine parts.
The image shown is for illustrative purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Smoke hose, Black/Black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air locking.
Please refer to the body dimension diagram to ensure that sufficient installation space is secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(*Fluid degradation also progresses even in storage.)
If there is too much moisture in the brake fluid, it can easily boil due to the heat during braking, rust components within the hydraulic system, and potentially lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selectable manufacturer part numbers:
Daytona 78400 (Vertical type φ19 Black/Buff clear/Clear tank)
Daytona 78402 (Vertical type φ19 Black/Black/Clear tank)
Daytona 64208 (Vertical type φ19 Gold/Buff clear/Clear tank)
Daytona 64207 (Vertical type φ19 Gold/Black/Clear tank)
Daytona 95657 (Vertical type φ19 Black/Silver/Smoke tank)
Daytona 95658 (Vertical type φ19 Black/Black/Smoke tank)
Daytona 61748 (Horizontal type 14mm Silver/Buff clear/Clear tank)
Daytona 61756 (Horizontal type 14mm Gold/Buff clear/Clear tank)
Daytona 61757 (Horizontal type 14mm Black/Buff clear/Clear tank)
Daytona 61751 (Horizontal type 14mm Black/Black/Clear tank)

Compatible models: ZZR1100 (Model years 93-01, overseas model)

Installation details: Clutch (1 piece)

Please be sure to inquire before ordering and check on the manufacturer's website or similar.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered by the manufacturer, discontinued, or out of stock.
Please be sure to check the size and design before ordering.
The color of the product image may differ slightly depending on your PC or mobile phone environment.