ZRX1200 Dark Mesh Clutch Hose Master Cylinder Set

【ZRX1200/S/R Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose ZRX1200/S/R 01-08 Vertex】
This is a great value product that includes a Nissin master cylinder and clutch hose set.
As it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses play a role in preventing expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from the genuine parts.
The images are for illustration purposes only.
Depending on the vehicle, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not selectable cannot be sold.
The actual included parts vary depending on the vehicle model.
Brake fluid must be purchased separately.

Hose details: Smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 standard thread included).
Exclusively for handle outer diameter Φ22.2.
Never use any lever other than the specified one.
Please note that overtightening the air bleeder can crush the bleeder hole or tip, causing fluid leaks or air entrapment.
Refer to the main body dimension diagram and be sure to check that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(*Fluid degradation also progresses during storage.)
If the moisture content in the brake fluid increases, it becomes more prone to boiling due to heat during braking, can rust components in the hydraulic system, and may lead to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant degradation is observed, earlier replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) beforehand.

Selected manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible models: ZRX1200 (model years 01-08, overseas models)

Installation details: Clutch (1 piece)

Please inquire and check the manufacturer's website before ordering.
For detailed information about the product, please check the manufacturer's website.
Some products may be backordered or out of stock due to manufacturer availability.
Please check the size and design carefully before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.