ZZR1200 Mesh Clutch Hose Master Cylinder Set

【ZZR1200 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose ZZR1200 02-03 Vertex】
This is a great value product that comes with a Nissin master cylinder and clutch hose set.
As it is a vehicle-specific set, it can be installed if it is compatible with your vehicle.

Mesh hoses play a role in preventing expansion compared to rubber hoses, thereby reducing play in the brake pedal, making speed control easier, and shortening the braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustration purposes only.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Clear hose, Blue/Red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Please be careful not to overtighten the air bleeder, as this may crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the body dimension diagram to ensure that sufficient mounting space can be secured.

◆About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air with long-term use.
(*Fluid degradation progresses even during storage.)
If there is too much moisture in the brake fluid, it may boil easily due to the heat during braking, corrode components within the hydraulic system, and potentially lead to a decrease in brake or clutch performance or unexpected problems.
Regular replacement every 2 years is required for normal use.
If significant degradation is observed, early replacement of the brake fluid is necessary.

Please be sure to check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selected manufacturer part numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible models: ZZR1200 (model years 02-03, overseas models)

Installation details: Clutch (1 piece)

Please be sure to inquire before ordering and confirm on the manufacturer's website or similar.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered from the manufacturer and may be discontinued or out of stock.
Please be sure to check the size and design before ordering.
The color of the actual product may differ slightly from the image due to the environment of your PC or mobile phone.