ZZR1200 Dark Mesh Clutch Hose Master Cylinder Set

【ZZR1200 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose ZZR1200 02-03 Vertex】
This great value product is a set that includes a Nissin master cylinder and a clutch hose.
It's a vehicle-specific set, so it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The images are for illustrative purposes.
Depending on the vehicle model, the color or type of master cylinder shown in some images may not be available for selection.
Sets without a selection cannot be sold.
The actual included parts vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Smoke hose, Black/Black (Aluminum)

The clamp holder has a mirror hole (M10 x P1.25 standard thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main body dimension diagram to ensure sufficient installation space is available.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades over long periods of use by absorbing moisture from the air.
(※Fluid degradation also progresses during storage.)
If the moisture content in the brake fluid increases, it can boil easily due to the heat generated during braking, corrode components within the hydraulic system, and potentially lead to decreased brake or clutch performance or unexpected problems.
Regular replacement every two years is required for normal use.
If significant degradation is observed, early replacement of the brake fluid is necessary.

Please always check the specifications and instruction manual for the master cylinder you plan to purchase on the manufacturer's website (Daytona) in advance.

Selectable Manufacturer Part Numbers:
Daytona 78400 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 78402 (Vertical φ19 Black/Black/Clear Tank)
Daytona 64208 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 64207 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95657 (Vertical φ19 Black/Silver/Smoke Tank)
Daytona 95658 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 61748 (Horizontal 14mm Silver/Buff Clear/Clear Tank)
Daytona 61756 (Horizontal 14mm Gold/Buff Clear/Clear Tank)
Daytona 61757 (Horizontal 14mm Black/Buff Clear/Clear Tank)
Daytona 61751 (Horizontal 14mm Black/Black/Clear Tank)

Compatible models: ZZR1200 (model years 02-03, overseas models)

Installation details: Clutch (1 hose)

Please always inquire before ordering and check the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered from the manufacturer and out of stock, or currently out of stock.
Please confirm the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.