1 4

ZZR1200 Mesh Brake Hose Master Cylinder Set

ZZR1200 Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

k3037-fwd121-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
Model number
Color (Cylinder/Lever/Tank)
Length
【ZZR1200 Mesh Brake Hose Clutch Hose Rear Clear Hose Smoke Hose Mesh Brake Hose ZZR1200 02-03 Vertex】
This is a great value product that includes a Nissin master cylinder and brake hose.
Since it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, makes speed control easier, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets without a selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Brake fluid must be prepared separately.

Hose details: Clear hose, Blue/Red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air entrapment.
Please refer to the main unit dimension diagram and make sure there is sufficient mounting space.

◆ About Brake Fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over time by absorbing moisture from the air due to prolonged use.
(※Fluid deterioration progresses even during storage.)
When the moisture content in the brake fluid increases, it becomes more prone to boiling due to the heat generated during braking, and it can rust components within the hydraulic system, potentially leading to reduced brake or clutch performance and unexpected problems.
Regular replacement every two years is necessary for normal use.
If significant deterioration is observed, early replacement of the brake fluid is required.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selected manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible models: ZZR1200 (model years 02-03, overseas models)

Installation details: Front (2 lines)

Please inquire before ordering, or check the manufacturer's website, etc.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock from the manufacturer.
Please check the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details