1 4

KR-1 Mesh Brake Hose Master Cylinder Set

KR-1 Mesh Brake Hose Master Cylinder Set

バーテックス(VERTEX)

k3076-fwd121-10-d1

¥26,477
¥26,477
Sale Sold out
Taxes included. Shipping calculated at checkout.
265 points to be awarded
Model number
カラー(シリンダー/レバー/タンク)
長さ
【KR-1 Mesh Brake Hose Front Rear Clear Hose Smoke Hose Mesh Brake Hose KR-1 Vertex】
This is a great value product that includes a Nissin master cylinder and a brake hose set.
As it is a vehicle-specific set, it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, reducing brake pedal play, making speed control easier, and shortening braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
Images are for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors and types shown in the images may not be available for selection.
Sets not available for selection cannot be sold.
Actual included parts vary depending on the vehicle model.
Brake fluid must be prepared separately.

Hose details: Clear hose, blue/red (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 regular thread included).
For handlebars with an outer diameter of Φ22.2 only.
Never use any lever other than the specified one.
Be careful not to overtighten the air bleeder, as this can crush the bleeder hole or tip, leading to fluid leaks or air locking.
Please refer to the body dimension diagram and ensure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid degrades by absorbing moisture from the air due to long-term use.
(Fluid degradation also progresses during storage.)
If the amount of moisture in the brake fluid increases, it may boil more easily due to heat generated during braking, or rust components within the hydraulic system, potentially leading to reduced brake or clutch performance or unexpected problems.
Regular replacement every two years is required with normal use.
If significant degradation is observed, early replacement of the brake fluid will be necessary.

Always check the specifications and instruction manual of the master cylinder you plan to purchase on the manufacturer's (Daytona) website in advance.

Selected manufacturer part numbers:
Daytona 79882 (Vertical φ19 Black/Buff Clear/Clear Tank)
Daytona 79883 (Vertical φ19 Black/Black/Clear Tank)
Daytona 79884 (Vertical φ19 Gold/Buff Clear/Clear Tank)
Daytona 79885 (Vertical φ19 Gold/Black/Clear Tank)
Daytona 95653 (Vertical φ19 Black/Buff Clear/Smoke Tank)
Daytona 95654 (Vertical φ19 Black/Black/Smoke Tank)
Daytona 96872 (Vertical φ19 Black/Buff Clear/Smoke Tank Short Lever)
Daytona 61745 (Horizontal 5/8 inch Silver/Buff Clear/Clear Tank)
Daytona 61744 (Horizontal 5/8 inch Gold/Buff Clear/Clear Tank)
Daytona 61747 (Horizontal 5/8 inch Black/Buff Clear/Clear Tank)
Daytona 61738 (Horizontal 5/8 inch Black/Black/Clear Tank)
Daytona 61746 (Horizontal 5/8 inch Gold/Black/Clear Tank)
Daytona 62411 (Diagonal Horizontal φ19 Black/Buff Clear/Clear Tank)
Daytona 74751 (Round Integrated 5/8 inch Black/Buff Clear/Clear Tank)

Compatible model: KR-1 (Year 89-90, Model KR250B)

Installation details: Front (2 hoses)

Please inquire before ordering and confirm on the manufacturer's homepage etc.
For detailed product information, please check the manufacturer's website.
Some products may be out of production or out of stock due to manufacturer取り寄せ (backorder).
Please be sure to check the size and design before ordering.
The color of the product in the image may differ slightly from the actual product due to the environment of your PC or mobile phone.

適合車種の情報は現在登録されていません。

View full details