1 6

Ninja 250 Mesh Brake Hose Master Cylinder Set Front Ninja 250 13-14 JBK-EX250L

Ninja 250 Mesh Brake Hose Master Cylinder Set Front Ninja 250 13-14 JBK-EX250L

バーテックス(VERTEX)

k3086-fsd121-10-d13

¥15,990
¥15,990
Sale Sold out
Taxes included. Shipping calculated at checkout.
160 points to be awarded
Model number
Color (cylinder/lever/reservoir)
Hose Color & Length
[Ninja 250 Mesh Brake Hose Master Cylinder Set Front Ninja 250 13-14 JBK-EX250L Vertex]
This is a great value product set that includes a Nissin master cylinder and brake hose.
It is a vehicle-specific set, so it can be installed on compatible vehicles.

Mesh hoses prevent expansion compared to rubber hoses, which reduces play in the brake pedal, allows for easier speed control, and shortens braking distance.
As these are custom parts, the routing and length may differ from genuine parts.
The image is for illustration purposes only.
Depending on the vehicle model, some of the master cylinder colors or types shown in the images may not be available for selection.
Sets that are not available for selection cannot be sold.
The actual included parts will vary depending on the vehicle model.
Please prepare brake fluid separately.

Hose details: Choice of clear hose, blue/red (aluminum) or smoke hose, black/black (aluminum)

The clamp holder has a mirror hole (M10 x P1.25 right-hand thread included).
Exclusively for handle outer diameter Φ22.2.
Never use levers other than the specified ones.
Please note that overtightening the air bleeder can crush the bleeder hole or tip, leading to fluid leaks or air lock.
Please refer to the body dimension diagram and ensure that sufficient installation space can be secured.

◆About brake fluid
Do not use silicone-based DOT5 (BF5) brake fluid.
Brake fluid deteriorates over long periods of use by absorbing moisture from the air.
(*Deterioration of fluid progresses even during storage.)
If the amount of moisture in the brake fluid increases, it can easily boil due to heat during braking, corrode parts within the hydraulic system, and potentially lead to decreased brake or clutch performance and unexpected problems.
Regular replacement every two years is required for normal use.
If significant deterioration is observed, early replacement of the brake fluid will be necessary.

Please be sure to check the specifications and instruction manual on the manufacturer's website (Daytona) for the master cylinder you plan to purchase beforehand.

Selected manufacturer part numbers:
Daytona 61739 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank)
Daytona 61742 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank)
Daytona 61758 (Horizontal 1/2 inch Black/Black/Clear Tank)
Daytona 26853 (Horizontal 1/2 inch Silver/Buff Clear/Clear Tank Short Lever)
Daytona 49017 (Horizontal 1/2 inch Black/Buff Clear/Clear Tank Short Lever)
Daytona 43336 (Horizontal 1/2 inch Black/Black/Clear Tank Short Lever)
Daytona 74755 (Round Integrated 1/2 inch Black/Buff Clear/Clear Tank)

Compatible model: Ninja 250 (Model year 13-14, Model JBK-EX250L)

Installation details: Front (1 piece)

Please be sure to inquire before ordering, and check with the manufacturer's website.
For detailed product information, please check the manufacturer's website.
Some products may be back-ordered or out of stock from the manufacturer.
Please check the size and design carefully before ordering.
Due to the environment of your PC or mobile phone, the color of the image may differ slightly from the actual product.

適合車種の情報は現在登録されていません。

View full details