LED Drawing Lamp Arrow Type Red

【KOITO LBL-9004R LED Projection Lamp, Arrow Type, Red, Auxiliary Lamp for Warehouses, Truck Compartments, Markers by Koito】
Arrow projection helps prevent collision accidents during in-yard operations.
【Improved Visibility with Arrow Projection】

An arrow is projected onto the floor, alerting nearby workers to approaching vehicles and helping to prevent collision accidents.
【Compatible with 12V-48V Systems】

Can be installed on any vehicle.
*Cannot be used on public roads.
【Lightweight / Compact Design】

【Easy Installation】

Comes with a bracket (bolts and nuts included) for easy installation.
【About the Overvoltage-Compatible Intermediate Harness】

This intermediate harness is designed to suppress damage to the LED projection lamp caused by peak voltage from the vehicle body of 48V vehicles (some vehicles).

(1) When raising and lowering the forks of a forklift, the peak voltage may exceed 85V.
(2) When towing parts with a parts transport vehicle, the peak voltage may exceed 85V.

The peak voltage for the LED projection lamp is set at approximately 80V, and exceeding this voltage can cause malfunctions.
If you are installing this on a 48V vehicle, please measure the voltage beforehand. If the peak voltage exceeds 80V, please purchase the separately available "Overvoltage-Compatible Intermediate Harness" for the LED projection lamp and install it when mounting the LED projection lamp.
If you are installing this on a 48V vehicle and cannot determine the peak voltage due to reasons such as "unable to measure voltage," we recommend installing this product.
Specifications:
・Type: Arrow type
・Color: Red
・Light source type: Red LED
・Rating: 12V～48V 11W (at 48V)
・Number of light sources: 3
・Weight (including bracket): 360g
・Dustproof/Waterproof performance: IP67
・Vibration resistance: 7G
・Operating temperature: -30～+80℃
Set contents/accessories:
・Mounting bracket included
・Bolts (M6) and nuts included
Precautions:
*This product is an onboard lighting device for DC12V-48V.
Please check the voltage of the vehicle to be installed and do not use it with voltages other than the specified voltage.
*This product does not comply with safety standards and therefore cannot be used on public roads.
*Also, it does not meet UN R26 external protrusion requirements and therefore cannot be installed on passenger cars with 9 seats or less.
(Passenger cars with seating capacity of 10 or more, two-wheeled vehicles [including those with sidecars], light vehicles with tracks and skids,
towed vehicles, large/small special vehicles are excluded.)
*The harness wiring the lamp must be a wire (positive wire) with a fuse incorporated.
(1A fuse recommended)
*This product must be mounted on a flat surface.
Mounting on a curved surface may cause instability of the product and damage to the lighting device.
*For usage instructions and precautions, please be sure to check the included instruction manual before use.
*Specifications and production of listed products may change or be discontinued without prior notice.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please understand.