Truck All-LED Rear Combination Lamp, 2-Unit Sequential Turn, Left, Clear, 24V, 1 pc.

【KOITO LEDRCL-24L2SC Truck All-LED Rear Combination Lamp, 2-Lens Type, Sequential Turn, Left, Clear, 24V, 1 pc., Koito】
Smart & Stylish
All-in-one, installable even in small spaces
New sequential turn (Clear Ver., Red Ver.) added to the lineup
【UN Component Certified Product】

● Can be installed on small trucks (24V vehicles).
● Due to LED conversion (instantaneous lighting 0.3 seconds faster than incandescent),
following vehicles can recognize it 7m earlier when driving at 80km/h, reducing rear-end collisions.
Depending on the model year of the vehicle and the combination of LED rear combination lamps, installation may not be possible.
Please check the compatible vehicle models and necessary options below.
Please note that this compatibility table is reference information based on Koito Manufacturing's own research and does not guarantee compatibility.
Therefore, after installing the product on the vehicle, please confirm its operation and ensure that it complies with automobile-related laws and regulations such as safety standards.
Specifications:
・Type: Sequential Turn
・Side: Left
・Color: Clear
・Rated Voltage: 24V
・Tail: 1.8W
・Stop: 3.7W
・Turn: 24.9W
・Back: 2.8W
・Vinyl Tube Color: Gray
・Quantity: 1 pc.
Set Contents / Accessories:
・1 Reflex Reflector included
Precautions:
● This LED rear combination lamp and its optional parts are intended for vehicles sold from 2010 onwards.
● The warranty does not apply if installed on a trailer (towed vehicle).
● After installing this LED rear combination lamp, always check that the wire breakage detection function (built into the vehicle), as stipulated by safety standards, operates correctly.
If the wire breakage detection function does not operate correctly, it will be a violation of the law and cannot be installed.
● Before purchasing, please check the installation space. If there is not enough space, installation is not possible.
(Please check the lamp dimensions on this page or in the "Smart Truck Lamp Series" catalog.)
● If a warning canceller is used, power saving may be compromised.
● For classifications of large, medium, and small vehicles, please refer to the vehicle inspection certificate provided with your vehicle.
● In case of damage, the entire assembly must be replaced.
● The inner surface of the lens may temporarily fog up due to rain while driving or car washing.
This is the same phenomenon as window fogging during rain and does not indicate a functional problem.
● If the outermost edge of the reflex reflector built into the rear combination lamp exceeds 400mm (Koito recommends 385mm) from the outermost edge of the vehicle,
install the included reflex reflector within 400mm from the outermost edge of the vehicle, with its upper edge within 900mm from the ground, and its lower edge at least 250mm from the ground.
● To ensure this product is always used and installed in the best possible condition, please carefully read the "Instruction Manual" and "Usage Precautions" included with the product,
understand their contents, and use the product correctly.
● This product is exclusively for automobiles. Do not use it for anything other than automobiles.
Furthermore, we are not responsible for malfunctions or other issues that arise from use outside of the specified applicable purposes.
● Please use the product in a way that does not violate automobile-related laws and regulations, such as safety standards.
● Specifications and production are subject to change or discontinuation without prior notice. Please be aware of this in advance.
* The actual specifications may differ in left and right orientation.
* Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.