Truck All-LED Rear Combination Lamp, 3-Gang Type, Sequential Turn, Left, Red, 24V, 1 pc.

【KOITO Koito LEDRCL-24LS Truck All-LED Rear Combination Lamp, 3-Gang Type, Sequential Turn, Left, Red, 24V, 1 pc, Koito】
Smart & Stylish
New lineup includes clear inner lens version.
Achieves a clear appearance when not illuminated.
Added to the Red Version (red inner lens), expanding your choices.
【UN ECE certified product】

● Can also be installed on small trucks (24V vehicles).
● LEDification (instantaneous illumination ▲0.3 seconds compared to incandescent) allows
following vehicles to detect it 7m earlier when driving at 80km/h, reducing rear-end collisions.
★ Regarding integration into 21W specification (excluding Mitsubishi Fuso)
The 3-gang type is currently sold in 25W and 21W specifications, but as of 'June 1, 2021', we will integrate it into the 21W turn specification.
This is to improve the robustness of the system against varying turn lamp filament detection criteria (thresholds) and electrical control systems among different manufacturers, by integrating into a lamp with the same power consumption as an incandescent bulb (21W).
We kindly ask for your understanding and cooperation.
(1) Applicable products: 3-gang type (normal turn / sequential turn specifications) *Yabusame, 2-gang type, and Kabuki designs are not applicable.
(2) Applicable manufacturers: Hino Motors / Isuzu Motors / UD Trucks *Mitsubishi Fuso is not applicable.
(3) Start date: From June 1, 2021
*For Mitsubishi Fuso vehicles, please use the 25W specification.
*Sales of the 25W specification will continue for repair and replacement.
【Precautions for repair and replacement】

For repair and replacement (one side) on vehicles equipped with the 25W specification, be sure to install the 25W specification.
If a different specification is installed, the turn signal blinking speed will not match, leading to non-compliance with regulations.
Depending on the vehicle model year and the combination of LED rear combination lamps, installation may not be possible.
Please check the compatible vehicle models and necessary options from the following.
Please note that this compatibility table is reference information based on Koito Manufacturing's own research and does not guarantee compatibility.
Therefore, after installation on the vehicle, perform an operation check and use it in a way that does not violate automotive-related laws and regulations such as safety standards.
Specifications:
・Type: Sequential Turn
・Side: Left
・Color: Red
・Rating: 24V
・Tail: 2.0W
・Stop: 7.6W
・Turn: 25.5W
・Back: 3.2W
・Vinyl tube color (right/left): Red/Yellow
・Quantity: 1 pc
Precautions:
● These LED rear combination lamps and optional parts are intended for vehicles sold after 2010.
● Installation on trailers (towed vehicles) is not covered by the warranty.
● After installing these LED rear combination lamps, always check that the filament detection function (vehicle-mounted)
as stipulated by safety standards, operates correctly.
If the filament detection function does not operate correctly, it will be a violation of regulations and cannot be used.
● Before purchasing, please check the installation space. Installation is not possible if there is not enough space.
(Please check the lamp dimensions on this page or in the "Smart Truck Lamp Series" catalog.)
● If a warning canceller is used, power saving may be compromised.
● For classifications of heavy-duty, medium-duty, and light-duty vehicles, please refer to the vehicle inspection certificate.
● In case of damage, ASSY replacement is required.
● Even when the lamp is in normal condition, the inside of the lens may temporarily fog up due to rain or car washing.
This is the same phenomenon as window fogging during rain and does not indicate a functional problem.
● To ensure that this product is always used and installed in the best condition, please be sure to read the "Instruction Manual"
and "Precautions for Use" included with the product carefully and use it correctly after understanding the contents.
● This product is exclusively for automobiles. Do not use it for anything other than automobiles.
Furthermore, we are not responsible for any malfunctions or other issues that may arise if the product is used for applications other than its intended purpose.
● Please use the product in a way that does not violate automotive-related laws and regulations such as safety standards.
● Specifications and production may change or be discontinued without notice, so please be aware of this in advance.
*The actual specifications may differ from left to right.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.