Truck All-LED Rear Combination Lamp, Triple Type, Sequential Turn, Left, Clear, 24V, 1 pc.

【KOITO LEDRCL-24LSCD Truck All-LED Rear Combination Lamp, 3-Lamp Type, Sequential Turn, Left, Clear, 24V, 1 pc. Koito】
Smart & Stylish
Now offering a new lineup of clear inner lens versions.
Achieves a clear appearance when not lit.
Expands choices in addition to the red version (red inner lens).
【UN ECE certified product】

● Can also be installed on light-duty trucks (24V vehicles).
● LED conversion (instantaneous illumination 0.3 seconds faster than incandescent) allows following vehicles to confirm 7m earlier at 80Km/h, reducing rear-end collisions.
★ Regarding the integration to 21W specification (excluding Mitsubishi Fuso)
The 3-lamp type currently sells both 25W and 21W specifications, but from "June 1, 2021", it will be integrated into the 21W turn specification.
This is to improve the robustness of the system against different manufacturers' turn light disconnection detection standards (thresholds) and electrically controlled systems by integrating into a lamp with the same power consumption as an incandescent bulb (21W).
We kindly ask for your understanding and cooperation.
(1) Applicable products: 3-lamp type (normal turn / sequential turn specifications) *Yabusame, 2-lamp type, Kabuki design are not applicable.
(2) Applicable manufacturers: Hino Motors / Isuzu Motors / UD Trucks *Mitsubishi Fuso is not applicable.
(3) Start date: June 1, 2021 ~
*For Mitsubishi Fuso vehicles, please use the 25W specification.
*Sales of the 25W specification will continue for repair and replacement.
【Precautions for repair and replacement】

For repair and replacement (one side) of vehicles equipped with the 25W specification, be sure to install the 25W specification.
If different specifications are installed, the turn signal blinking speed will not match, leading to non-compliance with regulations.
Installation may not be possible depending on the combination of vehicle model year and LED rear combination lamp.
Please check the compatible vehicle models and necessary options from the following.
Please note that this compatibility table is reference information based on Koito Manufacturing's独自の research and does not guarantee compatibility.
Therefore, after installation on the vehicle, please perform an operation check and use it in a way that does not violate automotive laws and regulations such as safety standards.
Specifications:
・Type: Sequential Turn
・Side: Left
・Color: Clear
・Rating: 24V
・Tail: 2.0W
・Stop: 7.6W
・Turn: 25.5W
・Back: 3.2W
・Vinyl tube color/(Right/Left): Red/Yellow
・Quantity: 1 pc.
Precautions:
● This LED rear combination lamp and optional parts are intended for vehicles sold after 2010.
● Warranty is not applicable when installed on trailers (towed vehicles).
● After installing this LED rear combination lamp, please ensure that the disconnection detection function (built into the vehicle) as stipulated by safety standards operates correctly.
If the disconnection detection function does not operate correctly, it will be a violation of regulations and cannot be used.
● Before purchasing, please check the installation space. If there is not enough space, installation is not possible.
(Please check the lamp dimensions on this page or in the "Smart Truck Lamp Series" catalog.)
● If a warning canceller is used, power saving may be compromised.
● For classifications of large, medium, and small vehicles, please refer to the vehicle inspection certificate.
● In case of damage, ASSY replacement is required.
● Even if the lamp is in normal condition, the inside of the lens may temporarily fog up due to rain or car washing.
This is the same phenomenon as windows fogging up in rainy weather and does not pose a functional problem.
● To use and install this product in the best possible condition, please be sure to read the "Instruction Manual" and "Precautions for Use" included with the product carefully and understand the contents before using it correctly.
● This product is exclusively for automobiles. Do not use it for anything other than automobiles.
Furthermore, we are not responsible for any problems that occur when used for purposes other than the specified applicable uses.
● Please use it in a way that does not violate automotive laws and regulations such as safety standards.
● Specifications and production are subject to change or discontinuation without prior notice, so please be aware of this in advance.
*The actual specifications may differ from left to right.
*Images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.