Truck All-LED Rear Combination Lamp, 3-Gang Type, Normal Turn, Right, Red, 24V, 1 pc.

【KOITO Koito LEDRCL-24R All-LED Rear Combination Lamp for Trucks, 3-Gang Type, Normal Turn, Right, Red, 24V, 1 pc. Koito】
Smart & Stylish
New lineup includes Inner Lens Clear Ver.
Achieves a clear appearance when not lit.
Expanded choices in addition to Red Ver. (Inner lens: red)
【UN ECE certified product】

● Can also be installed on small trucks (24V vehicles).
● LED conversion (instantaneous lighting 0.3 seconds faster than incandescent) allows
following vehicles to detect the truck 7 meters earlier when driving at 80 km/h, reducing rear-end collisions.
★ Regarding the integration to 21W specification (excluding Mitsubishi Fuso)
The 3-gang type is currently sold in 25W and 21W specifications, but will be integrated into the 21W turn specification from "June 1, 2021".
This is to improve the robustness of the system against different manufacturers' turn circuit break detection method standards (thresholds) and electrically controlled systems by integrating to a lamp with the same power consumption as incandescent bulbs (21W).
We kindly ask for your understanding and cooperation.
(1) Applicable products: 3-gang type (normal turn/sequential turn specifications) *Yabusame, 2-gang type, and Kabuki design are not applicable.
(2) Applicable manufacturers: Hino Motors / Isuzu Motors / UD Trucks *Mitsubishi Fuso is not applicable.
(3) Start date: June 1, 2021 ~
*For Mitsubishi Fuso vehicles, please use the 25W specification.
*Sales of the 25W specification will continue for repair and replacement.
【Precautions for repair and replacement】

For repair and replacement (one side) of vehicles equipped with the 25W specification, be sure to install the 25W specification.
If a different specification is installed, the turn signal blinking speed will not match, and it will be non-compliant with regulations.
Depending on the combination of vehicle year and LED rear combination lamp, installation may not be possible.
Please check the compatible vehicle models and necessary options from the following.
Please note that this compatibility table is reference information based on Koito Manufacturing's own research and does not guarantee compatibility.
Therefore, after installing on the vehicle, please perform an operation check and use it in a way that does not violate automotive laws and regulations such as safety standards.
Specifications:
・Type: Normal turn
・Direction: Right
・Color: Red
・Rating: 24V
・Tail: 2.0W
・Stop: 7.6W
・Turn: 25.5W
・Back: 3.2W
・Vinyl tube color (Right/Left): Black/Gray
・Quantity: 1 pc.
Precautions:
● The LED rear combination lamp and optional parts are intended for vehicles sold from 2010 onwards.
● If installed on a trailer (towed vehicle), it will not be covered by the warranty.
● After installing the LED rear combination lamp, always check that the circuit break detection function (built into the vehicle) required by safety standards operates correctly.
If the circuit break detection function does not operate correctly, it is a violation of regulations and cannot be used.
● Before purchasing, please check the installation space. If there is not enough space, it cannot be installed.
(Please check the lamp dimensions on this page or in the "Smart Truck Lamp Series" catalog.)
● If a warning canceller is used, power saving may be compromised.
● For classifications of large, medium, and small vehicles, please check the vehicle inspection certificate.
● In case of damage, the entire assembly must be replaced.
● Even if the lamp is in normal condition, the inside of the lens may temporarily fog up due to rain or car washing.
This is the same phenomenon as window glass fogging up in the rain and does not pose a functional problem.
● To ensure that this product is always used and installed in the best possible condition, please be sure to read the "Instruction Manual" and "Precautions for Use" included with the product carefully and use it correctly after understanding the contents.
● This product is exclusively for automobiles. Do not use it for anything other than automobiles.
Furthermore, we are not responsible for any malfunctions that occur when used for purposes other than the specified applicable use.
● Please use in a way that does not violate automotive laws and regulations such as safety standards.
● Specifications and production are subject to change or discontinuation without notice, so please be aware of this in advance.
*The actual specifications may differ from left to right.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.