All-LED Rear Combination Lamp for Trucks, Double Type, Sequential Turn, Right, Clear, 24V, 1 pc

【KOITO Koito LEDRCL-24R2SC All-LED Rear Combination Lamp for Trucks, 2-Unit Type, Sequential Turn Signal, Right, Clear, 24V, 1 pc, Koito】
Smart & Stylish
All-in-one that can be installed even in small spaces
Sequential Turn (Clear Ver. and Red Ver.) newly added to the lineup
【UN Component Certified Product】

●Can also be installed on small trucks (24V vehicles).
●LEDification (instantaneous illumination is 0.3 seconds faster than incandescent lamps) allows
following vehicles to detect you 7m earlier when driving at 80Km/h, reducing rear-end collisions.
Depending on the model year of the vehicle and the combination of LED rear combination lamps, installation may not be possible.
Please check the compatible vehicles and necessary options below.
Please note that this compatibility chart is reference information based on Koito Manufacturing Co., Ltd.'s own research and does not guarantee compatibility.
Therefore, after installing it on the vehicle, perform an operation check and use it in a manner that does not violate automotive-related laws and regulations such as safety standards.
Specifications:
・Type: Sequential Turn
・Side: Right
・Color: Clear
・Rated: 24V
・Tail: 1.8W
・Stop: 3.7W
・Turn: 24.9W
・Back: 2.8W
・Vinyl tube color: Gray
・Quantity: 1 pc
Set contents/accessories:
・1 reflex reflector included
Precautions:
●This LED rear combination lamp and optional parts are intended for vehicles sold in
2010 or later.
●Warranty is void if installed on a trailer (towed vehicle).
●After installing this LED rear combination lamp, please ensure that the wire break detection function
(built into the vehicle) stipulated by safety standards operates correctly.
If the wire break detection function does not operate correctly, it will be a violation of regulations and cannot be installed.
●Before purchasing, please check the installation space. If there is not enough space, installation is not possible.
(Please check the lamp dimensions on this page or in the "Smart Truck Lamp Series" catalog.)
●If a warning canceller is used, power saving may be compromised.
●For classification of large, medium, and small vehicles, please check the vehicle inspection certificate.
●In case of damage, the entire assembly must be replaced.
●The inner surface of the lens may temporarily fog up due to driving in rain or car washing.
This is the same phenomenon as windows fogging up in the rain and does not pose a functional problem.
●If the outermost edge of the reflex reflector built into the rear combination lamp extends more than
400mm (Koito recommends 385mm) from the outermost edge of the vehicle, install the included reflex reflector within
400mm from the outermost edge of the vehicle / with the upper end of the reflex reflector within 900mm from the ground and the lower end above 250mm from the ground.
●To always use and install this product in the best condition, please be sure to read the "Instruction Manual"
and "Precautions for Use" included with the product carefully and understand the contents before using it correctly.
●This product is for automotive use only. Do not use it for anything other than automobiles.
We are not responsible for any defects or problems that occur if the product is used for purposes other than its intended application.
●Please use in a manner that does not violate automotive-related laws and regulations such as safety standards.
●Specifications and production may be changed or discontinued without prior notice, so please understand in advance.
*The actual specifications may differ from the left/right.
*The image is for illustration purposes only, and the design and specifications of the products shown may be changed without notice. Please understand.