Compact All-LED Rear Combination Lamp Type A (Right) 24V

【KOITO KOITO LEDRCL-24RH Small All-LED Rear Combination Lamp Type A (Right) 24V Auxiliary Lamp Truck Trailer Koito】
Smart & Stylish
Revolutionary all-in-one
All functions condensed into a compact unit
Long life achieved with Koito's LED technology
Lineup includes hazard power-saving specifications (power consumption reduced by 92% compared to conventional models)
【UN ECE certified product】

Depending on the model year of the vehicle and the combination of LED rear combination lamps, installation may not be possible.
Please check the compatible vehicle models below.
This compatibility table is reference information based on Koito Manufacturing Co., Ltd.'s own research and does not guarantee compatibility.
Therefore, after installing it on the vehicle, please check its operation and use it in a way that does not violate automobile-related laws and regulations such as safety standards.
Specifications:
・Type: A type (right)
・Rating: 24V
・Tail: 0.4W
・Stop: 4.4W
・Turn: 24.0W
・Back: 3.7W
Compatible with:
・Toyota/Dyna, Hino/Dutro (representative examples)
Precautions:
*When purchasing, please check the mounting pitch of the light fixture actually installed.
*For hazard power-saving specifications, please use a left and right set, and be sure to use the optional hazard power-saving connection harness.
If not used, the hazard power-saving function will not operate correctly.
●This product is exclusively for 24V automobiles. Do not use it for vehicles other than 24V automobiles.
We will not be responsible for any malfunctions when used for purposes other than the specified applicable uses.
●The hole diameter and connection connector differ between Type A and Type B, so please check before installation.
●The back buzzer emits sound from the bottom, so do not block the opening.
The sound may become inaudible.
●This LED rear combination lamp, repair parts (brackets), and optional parts are
intended for vehicles sold after 2010.
●Warranty is not covered if installed on a trailer (towed vehicle).
●After installing this LED rear combination lamp, please make sure that the
wire disconnection detection function (built into the vehicle) prescribed by safety standards operates correctly.
If the wire disconnection detection function does not operate correctly, it will be a violation of regulations and cannot be installed.
●In case of damage, the entire ASSY must be replaced.
●The inside of the lens may temporarily fog up during rainy weather or car washing.
This is the same phenomenon as windows fogging up during rainy weather and does not pose a functional problem.
●If the outermost edge of the reflex reflector part built into the rear combination lamp exceeds 400mm (Koito recommended 385mm) from the outermost edge of the automobile,
install the included reflex reflector within 400mm from the outermost edge of the automobile, and the upper edge of the reflex reflector within 900mm from the ground, and the lower edge within 250mm from the ground.
●To use and install this product in the best possible condition, please be sure to read the "Instruction Manual" and "Precautions for Use" included with the product carefully and use it correctly after understanding the contents.
●This product is exclusively for automobiles. Do not use it for vehicles other than automobiles.
We will not be responsible for any malfunctions when used for purposes other than the specified applicable uses.
●Please use it in a way that does not violate automobile-related laws and regulations such as safety standards.
●Specifications and production may be changed or discontinued without notice. Please be aware of this in advance.
*The actual specifications may differ from left to right.
*Images are for illustration purposes only, and the design and specifications of the products shown may be changed without prior notice. Please be aware of this.