Small All-LED Rear Combination Lamp, Without Back Buzzer, Type B (Right), 24V

【KOITO Koito LEDRCL-24RK Small All-LED Rear Combination Lamp, No Back Buzzer, B Type (Right), 24V, Auxiliary Lamp, Truck, Trailer, Koito】
Smart & Stylish
Revolutionary All-in-One
All functions condensed into a small unit
Long life achieved with Koito's LED technology
Hazard power-saving specification lineup (92% reduction in power consumption compared to conventional models)
【UN ECE certified product】

Depending on the vehicle's model year and the combination of LED rear combination lamps, installation may not be possible.
Please check the compatible vehicles below.
Please note that this compatibility chart is reference information based on Koito Manufacturing's独自の research and does not guarantee compatibility.
Therefore, after installing the product on your vehicle, please check its operation and ensure that it does not violate automotive laws and regulations, such as safety standards.
Specifications:
・Type: B type (Right)
・Rated: 24V
・Tail: 0.4W
・Stop: 4.4W
・Turn: 24.0W
・Back: 3.7W
Compatibility:
・Isuzu / Elf, Mazda / Titan, (representative examples)
Precautions:
*When purchasing, please check the mounting pitch of the actual installed lamp, etc.
*For hazard power-saving specifications, please use a pair of left and right lamps and be sure to use the optional hazard power-saving connection harness.
If not used, the hazard power-saving function will not operate correctly.
●This product is exclusively for 24V automobiles. Do not use it for vehicles other than 24V automobiles.
In addition, we are not responsible for malfunctions or defects that occur when the product is used for purposes other than its intended application.
●The hole diameter and connection connector differ between Type A and Type B, so please check before installation.
●The back buzzer emits sound from the bottom, so do not block the opening.
The sound may become inaudible.
●The LED rear combination lamp, repair parts (brackets), and optional parts are
intended for vehicles sold after 2010.
●The warranty does not apply if installed on a trailer (towed vehicle).
●After installing the LED rear combination lamp, please be sure to check that the wire break detection function (built into the vehicle) stipulated by safety standards operates correctly.
If the wire break detection function does not operate correctly, it violates regulations and cannot be installed.
●In case of damage, the entire assembly must be replaced.
●The inner surface of the lens may temporarily fog up due to rain or car washing.
This is the same phenomenon as windows fogging up in the rain and does not indicate a functional problem.
●If the outermost edge of the reflex reflector integrated into the rear combination lamp extends beyond 400mm (Koito recommends 385mm) from the outermost edge of the automobile,
please install the included reflex reflector within 400mm from the outermost edge of the automobile / the upper edge of the reflex reflector within 900mm from the ground, and the lower edge at least 250mm from the ground.
●To ensure optimal use and installation of this product at all times, please carefully read the "Instruction Manual" and "Precautions for Use" included with the product
and use it correctly after understanding its contents.
●This product is exclusively for automobiles. Do not use it for vehicles other than automobiles.
In addition, we are not responsible for malfunctions or defects that occur when the product is used for purposes other than its intended application.
●Please use the product in a way that does not violate automotive laws and regulations, such as safety standards.
●Specifications and production are subject to change or discontinuation without prior notice. Please be aware of this in advance.
*The actual specifications may differ from left to right.
*The images are for illustration purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.