All-LED Rear Combination Lamp Branch Harness for Trucks - Back Lamp Type, Long - 2,500mm, 1 pc.

【KOITO LEDRCL-IUBHL Long Type Branch Harness for Koito All-LED Rear Combination Lamp for Trucks, 2,500mm, 1 pc, Replacement Part】
This is an optional part for the LED rear combination lamp.
UN (ECE) certified product.
・This LED rear combination lamp and its optional parts are intended for vehicles sold from 2010 onwards.
・Warranty does not apply if installed on a trailer (towed vehicle).
・For classification of heavy and medium-duty vehicles, please refer to the vehicle inspection certificate.
・For Fuso and UD Trucks vehicles, a separate connector conversion harness is required.
・For Hino vehicles, a separate warning canceller is required.
・When using a warning canceller, power saving may be compromised.
・For the backup lamp, a separate branch harness for the backup lamp is required.
Application: Backup lamp branch (1 to 2 wires) 2500mm
*Please be sure to read the "Instruction Manual" and "Precautions for Use" included with the product carefully and use it correctly after understanding the contents.
*Do not use for anything other than automobiles. We are not responsible for any malfunctions that occur when used for purposes other than the specified applicable uses.
*Please use in compliance with automobile-related laws and regulations such as safety standards.
*In case of damage, the entire assembly must be replaced.
*Specifications and production may be changed or discontinued without notice. Please be aware of this in advance.
*The published photos are for illustrative purposes only. They may differ from the actual product.
Specifications:
・Type: Branch harness for backup lamp
・Type: Long type
・Size: 2,500mm
・Quantity: 1 pc
Compatibility:
・For Isuzu and UD Trucks
*For vehicles with one backup lamp on the body side
Precautions:
*This LED rear combination lamp and its options are intended for vehicles sold from 2010 onwards.
*After installing this LED rear combination lamp, please be sure to check that the wire break detection function (built into the vehicle) stipulated by safety standards operates correctly.
If the wire break detection function does not operate correctly, it will be a violation of regulations and cannot be installed.
*Warranty does not apply if installed on a trailer (towed vehicle).
*For classification of heavy, medium, and light-duty vehicles, please refer to the vehicle inspection certificate.
*For Mitsubishi Fuso/UD Trucks vehicles, Hino heavy/medium-duty vehicles released in April 2017, Toyota/Dyna, Mazda/Titan,
Hino/Dutro, and Isuzu/Elf, a separate connector conversion harness is required.
*If replacing a incandescent rear combination lamp with a backup buzzer with a compatible LED rear combination lamp, the backup buzzer function will be lost.
*For Hino heavy/medium-duty vehicles, a separate warning canceller is required.
*When using a warning canceller, power saving may be compromised.
*In case of damage, the entire assembly must be replaced.
●To ensure the best possible use and installation of this product, please be sure to read the "Instruction Manual"
and "Precautions for Use" included with the product carefully and use it correctly after understanding the contents.
●This product is for automobiles only. Do not use for anything other than automobiles.
We are not responsible for any malfunctions that occur when used for purposes other than the specified applicable uses.
●Please use in compliance with automobile-related laws and regulations such as safety standards.
●Specifications and production may be changed or discontinued without notice. Please be aware of this in advance.
*The images are for illustrative purposes only, and the design and specifications of the products shown may be changed without prior notice. Please understand.