Handlebars Matte Black 50mm Back Rebel 1100/T/DCT

【Kijima 204-3388A Handlebar Matte Black 50mm Back Rebel 1100/T/DCT】
■ This is a dedicated handlebar that allows you to achieve a comfortable position (individual differences apply) by moving the grip position 50mm closer and 15mm higher.
It is designed to be safe, not requiring any changes to cables or wires, and the change in vehicle dimensions is within acceptable limits, so no applications or other procedures are necessary.
■ Specifications
Compatible models: Rebel 1100 DCT (8BL-SC83) 2021-, Rebel 1100T DCT (8BL-SC83) 2023-
*This product is exclusively for DCT models. If installing on an MT model, the clutch cable set 202-9995 is required.
Color: Matte Black
Position: 50mm back
Size: W740/H80/R225
Handlebar diameter: Clamp part/1 inch (25.4mm), Grip part: 7/8 inch (22.2mm)
Material: Steel
■ Notes
*There is a risk of damage when removing the left side of the genuine grip heater. If damaged, replacement with a new one will be necessary.
*This product does not require changes to hoses/harnesses/wires, but if you are concerned, please change the brake hose, etc., to an appropriate length. Since the routing will change, please check and adjust the tension of the parking brake, etc.
*The rotation of the throttle may be sluggish due to individual differences in paint thickness. In that case, please adjust by filing the corresponding part on the handlebar side with a file, etc.
*This product has punch marks for positioning, but please use them as a guide and adjust to your preferred position after checking for interference with the tank, etc.
*This product has holes for fixing the switch BOX, but they may be slightly misaligned. In that case, please process them by enlarging the holes, etc., before use.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.