Final Gear Kit Primary Side 40T/13T for Dio/SR, Super Dio, Super Dio SR/ZX, Live Dio/ST/SR/ZX, Tact/S/Stand Up, etc.

【KN企画 G4013 Final Gear Kit Primary Side 40T/13T for Dio/SR Super Dio Super Dio SR/ZX Live Dio/ST/SR/ZX TACT/S/Stand Up, etc.】
・Final gear kit [Primary side/40×13]

【Features】

・This is a primary side final gear kit for vertical DIO models.
・The kit includes two parts: d (drive shaft) and c (counter gear), as shown in the image.
・It is designed to be used in combination with genuine secondary side gears. Please note that if used with KN Planning's secondary side final gear kit or other aftermarket secondary side kits, combinations may not be possible or the gear ratio may become significantly higher.
・This product has the same gear ratio as the G-Dash [AF23].
・Recommended for those who want a slightly higher gear ratio than the ZX.
【Size】

・d=13T
・c=40T
【Final Reduction Ratio Chart】

*Combination of secondary normal (13×45) and primary kit
・10×34・・・11.769229
・13×40・・・10.650885
・15×30・・・6.923076
・16×30・・・6.490383
*The smaller the number, the higher the gear.
【Normal Final Reduction Ratio】

・DIO/SR [AF18/25]
　12.115383
・Super DIO/SR [AF27/28]
　12.115383
・Super DIO ZX [AF28]
　10.917157
・Live DIO/ST/SR [AF34/35]
　12.115383
・Live DIO ZX [AF35]
　10.917157
・TACT/S [AF24/30/31]
　12.115383
・Giorno [AF24]
　12.115383
・DJ-1RR [AF19]
　12.115383
・G' [AF23]
　10.650885 *This product has the same gear ratio as the G-Dash original.
【Compatibility】

・DIO/SR [AF18/25]
SK50MJ 1091257～
・Super DIO [AF27]

・Super DIO SR/ZX [AF28]

・Live DIO/ST/SR/ZX [AF34/35]
～SK50MT *Not compatible with models SK50MV and later.
・TACT/S/Stand Up [AF24/30/31]

・Giorno [AF24]

・DJ-1RR [AF19]

・G' [AF23]
*This product has the same gear ratio as the G-Dash original.
【Notes】

*For installation, an oil press or shaft puller is required for reassembly as the [d] gear is press-fitted.
*For Live DIO, there are several types of counter gear thicknesses, and even if it is a compatible model, if the internal gears have been changed on a used vehicle, or if aftermarket parts are combined, or if the gear case cover is from a different model year, installation may not be possible. Please carefully check your vehicle and engine number, gear thickness, etc.
*Depending on the gear ratio of the vehicle being installed, it may become a high gear or a low gear.
*Images are for illustration purposes only. The design and specifications of the products shown may change without prior notice. Thank you for your understanding.