Big Brake Disc Floating Disc 200mm JOG Series

【KN Planning KN-JGDK-200LT Big Brake Disc Floating Disc 200mm Jog Series Motorcycle】
■Product Description This is a 200mm big disc rotor only. A caliper support is required separately. Braking power will be significantly improved compared to the stock rotor. Specifications Material: Outer stainless steel 420 Inner aluminum [Compatible Calipers] Stock calipers for each model, or Brembo (commonly known as "Yamanbo") installed on 3YK such as Z/ZR: KN Planning 2POT (DK02/DK05 series) ■Compatible Models Super JOG ZR, Remote Control JOG ZR, Axis 50/90, JOG 50/90, Aprio 2 *Grand Axis 100 only (initial model of 5FA1) (5FA2 and later are not compatible × ← due to 4 holes) *Installation on Remote Control JOG ZR requires G-Craft front forks + KN Planning 2POT calipers. Precautions *Due to individual differences in calipers and front forks, the caliper center may be slightly off. Please adjust with shims, etc. *Bolts are not included, so 4 bolts are required separately. (Product number BOLT-DISK) *When combining a 200mm large-diameter disc rotor with a commonly known "Yamanbo" caliper or genuine caliper, it may be necessary to process the inside or outside of the brake pad to shave the contact surface of the brake pad. *As mentioned above, due to the tight design, there may be interference between the outer circumference of the disc rotor and the inner part of the caliper due to individual differences in the disc rotor, caliper, and fork. *If such interference occurs, processing such as shaving the interfering part will be required, so please consider carefully before purchasing. *The above interference occurs due to individual differences in the vehicle. This is not a product defect. Please be aware of this in advance.