Universal Shock Absorber Swap Shock Black/Red 180mm

[KN Planning SU-180-BKRD Universal Shock Absorber Swap Shock Black/Red 180mm]
・This is a universal 180mm single-sided scooter rear shock.
・5-step adjustable type
・Depending on the vehicle, the lower mounting position [crankcase side]
has a narrow mounting width, so please adjust with the included washer.
・This shock has a suitable length when a 90cc engine is swapped into a YAMAHA 50/90cc chassis.
・It can also be used universally.
・This is a reissued color. Limited edition.
[Main body color]
Body/Black, Spring/Red
[Size]

・Bolt spacing: 180mm
・Overall length: 208mm
・Overall width: 50mm [Maximum spring diameter]

・Thickness of bush side mounting part: 20mm
・Inner diameter of collar inside bush: 10mm
・Gap of U-shaped part opposite to bush: 20.5mm
・Inner diameter of mounting bolt hole of the U-shaped part: M8 (same as normal mirror thread) 7.5mm
・Spring size: 81 x 50mm [at weakest preload]

[Compatibility]

・YAMAHA 50/90cc chassis base [90cc engine swap]
vehicle
・Can also be used universally.
・Motocompo
* If replacing with a G-Ax engine 100cc,
we recommend 200mm.
[Set Contents/Accessories]

・Main shock absorber
・Adjustment washer
・8mm bolt
・Conversion collar (for cases where existing bolt hole is 10mm, etc.)
*Images are for illustration purposes only, and the design and specifications of the products shown may change without notice. Please understand.