1
/
of
1
Super Power Filter All-Weather φ35 Elbow 90° Clear Blue
Super Power Filter All-Weather φ35 Elbow 90° Clear Blue
SKU:kt-515-0801350
Regular price
¥2,269
Regular price
¥3,850
Sale price
¥2,269
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
23
points to be awarded
Couldn't load pickup availability
【KITACO 515-0801350 Super Power Filter All-Weather Type φ35 Elbow 90° Clear Blue KITACO 515-0801350】
This air filter is recommended for normal carburetors.
Since the intake efficiency will change, carburetor settings are required.
When driving in the rain, water may enter the filter, causing the carburetor settings to change.
For exhaust gas regulated models from the 2000 model year: For exhaust gas regulated models, due to lean combustion, settings may not be achievable, so the installation of power filters, etc., is not recommended.
For F1 vehicles: For F1 vehicles, installing power filters, air funnels, etc., as is will disrupt fuel regulation, so please do not install them.
However, this excludes cases where a device capable of fuel regulation (injection controller, KITACO's I-MAP) is installed and settings can be achieved.
If the filter aperture is a few millimeters smaller than the carburetor aperture of the vehicle, it will be a bit tight when fitting, but it can be installed by pushing it in.
If a long rear shock is installed, the filter may interfere with the body.
This type is less affected by conditions.
With a hood, it effectively protects against not only dirt and dust but also rain.
It improves intake efficiency and increases power.
Pay attention to the installation angle. If the cover is installed upside down, water may accumulate inside the cover during rainfall, hindering intake.
The dimensions indicate the length from the top of the filter to the bottom of the rubber pipe, with the filter standing vertically.
Carburetor settings are required for installation.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.
This air filter is recommended for normal carburetors.
Since the intake efficiency will change, carburetor settings are required.
When driving in the rain, water may enter the filter, causing the carburetor settings to change.
For exhaust gas regulated models from the 2000 model year: For exhaust gas regulated models, due to lean combustion, settings may not be achievable, so the installation of power filters, etc., is not recommended.
For F1 vehicles: For F1 vehicles, installing power filters, air funnels, etc., as is will disrupt fuel regulation, so please do not install them.
However, this excludes cases where a device capable of fuel regulation (injection controller, KITACO's I-MAP) is installed and settings can be achieved.
If the filter aperture is a few millimeters smaller than the carburetor aperture of the vehicle, it will be a bit tight when fitting, but it can be installed by pushing it in.
If a long rear shock is installed, the filter may interfere with the body.
This type is less affected by conditions.
With a hood, it effectively protects against not only dirt and dust but also rain.
It improves intake efficiency and increases power.
Pay attention to the installation angle. If the cover is installed upside down, water may accumulate inside the cover during rainfall, hindering intake.
The dimensions indicate the length from the top of the filter to the bottom of the rubber pipe, with the filter standing vertically.
Carburetor settings are required for installation.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware of this.
適合車種の情報は現在登録されていません。
