1
/
of
1
Super Power Filter, All-Weather, φ35, 90° Elbow, Clear Green
Super Power Filter, All-Weather, φ35, 90° Elbow, Clear Green
SKU:kt-515-0801357
Regular price
¥2,269
Regular price
¥3,850
Sale price
¥2,269
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
23
points to be awarded
Couldn't load pickup availability
[Kitaco 515-0801357 Super Power Filter All-Weather φ35 Elbow 90° Clear Green Kitaco 515-0801357]
This air filter is recommended for normal carburetors.
As intake efficiency will change, carburetor settings are required.
When riding in the rain, water may enter the filter, causing the carburetor settings to change.
For exhaust gas regulated models from 2000 onwards: For exhaust gas regulated models, which use lean combustion, settings may not be achievable, so installation of power filters or similar is not recommended.
For F1 vehicles: Do not install power filters, air funnels, etc. on F1 vehicles as is, as this will disrupt fuel regulation.
However, this does not apply if a device capable of fuel regulation (injection controller, Kitaco I-MAP) is installed and settings can be achieved.
If the filter diameter is a few millimeters smaller than the carburetor opening on your vehicle, it may be a little tight when fitting, but it can be installed by pushing it in.
If a long rear shock is installed, the filter may interfere with the body.
This type is less affected by conditions.
With a hood, it effectively protects against dust and dirt, as well as rain.
It improves intake efficiency and increases power.
Pay attention to the mounting angle. If the cover is installed upside down, water may accumulate inside the cover during rain, potentially obstructing intake.
The dimensions indicate the length from the top of the filter to the bottom of the rubber pipe when the filter is standing vertically.
Carburetor settings are required upon installation.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Thank you for your understanding.
This air filter is recommended for normal carburetors.
As intake efficiency will change, carburetor settings are required.
When riding in the rain, water may enter the filter, causing the carburetor settings to change.
For exhaust gas regulated models from 2000 onwards: For exhaust gas regulated models, which use lean combustion, settings may not be achievable, so installation of power filters or similar is not recommended.
For F1 vehicles: Do not install power filters, air funnels, etc. on F1 vehicles as is, as this will disrupt fuel regulation.
However, this does not apply if a device capable of fuel regulation (injection controller, Kitaco I-MAP) is installed and settings can be achieved.
If the filter diameter is a few millimeters smaller than the carburetor opening on your vehicle, it may be a little tight when fitting, but it can be installed by pushing it in.
If a long rear shock is installed, the filter may interfere with the body.
This type is less affected by conditions.
With a hood, it effectively protects against dust and dirt, as well as rain.
It improves intake efficiency and increases power.
Pay attention to the mounting angle. If the cover is installed upside down, water may accumulate inside the cover during rain, potentially obstructing intake.
The dimensions indicate the length from the top of the filter to the bottom of the rubber pipe when the filter is standing vertically.
Carburetor settings are required upon installation.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without prior notice. Thank you for your understanding.
適合車種の情報は現在登録されていません。
