1
/
of
1
Super Power Cleaner φ35/25
Super Power Cleaner φ35/25
SKU:kt-515-6000350
Regular price
¥1,816
Regular price
¥3,080
Sale price
¥1,816
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
19
points to be awarded
Couldn't load pickup availability
[KITACO 515-6000350 Super Power Cleaner φ35/25 KITACO 515-6000350]
This air filter is recommended for use with standard carburetors.
Since the intake efficiency will change, carburetor tuning is required.
When riding in the rain, water may enter the filter, which can alter the carburetor settings.
For exhaust gas regulated models from the 2000 model year onwards: For exhaust gas compliant models, power filters etc. are not recommended because their lean combustion may make it difficult to achieve proper settings.
For F1 vehicles: For F1 vehicles, do not install power filters or air funnels as they are, as this will disrupt fuel regulation.
However, this excludes cases where a device capable of fuel regulation (e.g., an injection controller or a KITACO I-MAP) is installed and proper settings can be achieved.
If the filter diameter is a few millimeters smaller than the carburetor opening diameter, it will be a bit tight when fitting but can be installed by pushing it on.
If a long rear shock is installed, the filter may interfere with the body.
This is a high-efficiency filter with a two-layer structure, featuring a coarse filter sponge on the outside and a fine one on the inside.
It is a self-cleaning filter that catches large dirt and dust particles, and also sheds dirt and dust that adhere due to vibrations during riding.
Diameter φ35, Height 110mm x Width 90mm (φ25 adapter included)
Carburetor tuning is required for installation.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.
This air filter is recommended for use with standard carburetors.
Since the intake efficiency will change, carburetor tuning is required.
When riding in the rain, water may enter the filter, which can alter the carburetor settings.
For exhaust gas regulated models from the 2000 model year onwards: For exhaust gas compliant models, power filters etc. are not recommended because their lean combustion may make it difficult to achieve proper settings.
For F1 vehicles: For F1 vehicles, do not install power filters or air funnels as they are, as this will disrupt fuel regulation.
However, this excludes cases where a device capable of fuel regulation (e.g., an injection controller or a KITACO I-MAP) is installed and proper settings can be achieved.
If the filter diameter is a few millimeters smaller than the carburetor opening diameter, it will be a bit tight when fitting but can be installed by pushing it on.
If a long rear shock is installed, the filter may interfere with the body.
This is a high-efficiency filter with a two-layer structure, featuring a coarse filter sponge on the outside and a fine one on the inside.
It is a self-cleaning filter that catches large dirt and dust particles, and also sheds dirt and dust that adhere due to vibrations during riding.
Diameter φ35, Height 110mm x Width 90mm (φ25 adapter included)
Carburetor tuning is required for installation.
*The image is for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.
適合車種の情報は現在登録されていません。
