Engine Mechanical Hanger

【KTC AE901 Engine Mecha Hanger】
●Capacity (maximum working load): 2,450N (250kgf)
●Winch weight (kg): 6
●Weight (kg): 16
●Compatible with impact-absorbing body vehicles, which are common in many cars nowadays.
●Even if the fender is sloped or dips forward, stable setup parallel to the ground is possible.
●Also compatible with vehicles that cannot be handled by conventional products, where fender ribs are short and cannot be set between fenders.
●Vehicle movement and lift operation are possible with the engine held in place.
●Since the bridge can be set diagonally, it can be used by shifting the bridge from above the belt during operations such as belt replacement.
●Rear-mounted winch adopted. The drive unit can be easily swapped left and right and moved to any position.
●This is a specialized tool for holding automobile engines.
●Application: Compatible with engines of FF vehicles, from kei cars to regular cars.
Detailed applications...
●Engine mass: Maximum working load = 2,450N (250kgf)
●Vehicle width: Maximum bridge slide width = 1,550mm
●Engine compartment length: Maximum foot slide width = 810mm
●Engine compartment recess width: Slide bar variable angle = 32° (one side)
●Engine compartment height difference: Height adjustment foot extension length = 50mm
●Fender inclination angle: Within 20°
●Maximum outer diameter of bolt at set point: 17.5mm
●Maximum height of bolt at set point: 20mm
*Cannot be used with vehicles where the set point is made of resin, or vehicles without mounting bolts at the set point. *Repair parts are available. Please contact your dealer for details.
*Images are for illustration purposes only, and the design and specifications of the products shown are subject to change without notice. Please understand.