(25.4SQ) Preset Torque Wrench 150-800NM

[KTC CMPB8008 (25.4SQ) Preset Type Torque Wrench 150-800NM]
●Drive size sq.: 25.4
●Torque range (Nm): 150-800
●Minimum scale (Nm): 5
●Type: Oval
●Overall length: 1050
●B: 71
●H: 36
●Weight kg: 4.5
●Equipped with a 40-tooth ratchet head, allowing work with a small 9-degree feed angle.
●Torque setting is easy; simply pull down the lock ring with your finger and turn the grip.
●The locking mechanism after torque setting prevents the set torque from accidentally changing during work.
●Measurement possible in both left and right directions. Measurement accuracy is ±4% for both directions, clearing ISO standards.
●The unique preset mechanism allows for accurate and easy torque setting in 5 N・m increments.
●When the set torque is reached, a light shock is felt in the hand and the head angle changes, confirming the completion of tightening. This is effective in work areas where the scale cannot be read.
●Effective for wheel nuts of large vehicles.
Resin case
●Once you hear a "click" or feel a light shock in your hand, do not apply any further load.
●Do not use to loosen bolts or nuts.
●When storing, set the torque to the lowest value.
*Repair parts are available. *The measurement scale is N・m scale only. (Simple conversion formula: 1kgf・m≒10N・m, 1N・m≒0.1kgf・m)
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without prior notice. Please be aware.