1
/
of
1
L-Beam 12V Wedge Medium Blue 6-LED Bulb
L-Beam 12V Wedge Medium Blue 6-LED Bulb
SKU:mh-l706fbl
Regular price
¥2,031
Regular price
¥2,640
Sale price
¥2,031
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
21
points to be awarded
Couldn't load pickup availability
[M&H Matsushima L706FBL L-Beam 12v Wedge Medium Blue 6-LED Bulb M&H Bulb]
12v 0.5w
12v Wedge (medium) insertion width: 9.5mm
Blue
This is the top model in the flat LED series for meters, position lights, and license plate lights, featuring a total of 6 diffused flat LEDs arranged in two tiers! It achieves both brightness and diffusion at a high level!
Can replace T10 wedge bulbs such as 12v 1.7w, 3.4w, and 5w.
The original body features a convex lens finish at the tip, emphasizing the characteristic linear and sharp light of LEDs! Furthermore, the sides are knurled to ensure diffusion.
LEDs are sensitive to heat, so using them in high-temperature areas, such as inside headlights, may shorten their lifespan or cause immediate failure.
Cannot be used for turn signals.
Wiring modification may be required for use in turn signal pilot lamps that are designed for both left and right sides.
The base type is exclusively for negative-ground vehicles where the base metal part is negative.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.
12v 0.5w
12v Wedge (medium) insertion width: 9.5mm
Blue
This is the top model in the flat LED series for meters, position lights, and license plate lights, featuring a total of 6 diffused flat LEDs arranged in two tiers! It achieves both brightness and diffusion at a high level!
Can replace T10 wedge bulbs such as 12v 1.7w, 3.4w, and 5w.
The original body features a convex lens finish at the tip, emphasizing the characteristic linear and sharp light of LEDs! Furthermore, the sides are knurled to ensure diffusion.
LEDs are sensitive to heat, so using them in high-temperature areas, such as inside headlights, may shorten their lifespan or cause immediate failure.
Cannot be used for turn signals.
Wiring modification may be required for use in turn signal pilot lamps that are designed for both left and right sides.
The base type is exclusively for negative-ground vehicles where the base metal part is negative.
*The image is for illustrative purposes only, and the design and specifications of the products shown are subject to change without notice. Thank you for your understanding.
適合車種の情報は現在登録されていません。
