1
/
of
1
L-beam 12V Wedge Special Green 2 LED Bulbs
L-beam 12V Wedge Special Green 2 LED Bulbs
SKU:mh-l707fgr
Regular price
¥1,184
Regular price
¥1,540
Sale price
¥1,184
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Orders placed by 2 PM will be shipped the same day.
配送方法/参考送料:Courier delivery: shipping fee ¥698
12
points to be awarded
Couldn't load pickup availability
【M&H Matsushima L707FGR L-Beam 12v Wedge Special Green 2-LED Bulb M&H Light Bulb】
12v 0.25w
12v Wedge (small) Socket Width: 4.6mm
Green
Two flat LEDs with a wide beam angle are mounted in parallel on an ultra-compact body! Despite its small size, it emits a bright and vibrant light.
Can replace 12v 2w T5, 12v 1.7w, and 3w T7 and T6.5 wedge bulbs.
*Can be used with T6.5's special 5mm socket width.
Original body with a convex lens finish on the tip that emphasizes the straight, sharp light characteristic of LEDs! Additionally, side knurling has been applied to ensure light diffusion.
LEDs are susceptible to heat; using them in high-temperature areas such as inside headlights may shorten their lifespan or cause them to fail quickly.
Cannot be used for turn signals.
Wiring modification may be required to use with turn signal pilot lamps that are compatible with both left and right sides.
The base type is exclusively for negative-ground vehicles where the metal part of the base is negative.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.
12v 0.25w
12v Wedge (small) Socket Width: 4.6mm
Green
Two flat LEDs with a wide beam angle are mounted in parallel on an ultra-compact body! Despite its small size, it emits a bright and vibrant light.
Can replace 12v 2w T5, 12v 1.7w, and 3w T7 and T6.5 wedge bulbs.
*Can be used with T6.5's special 5mm socket width.
Original body with a convex lens finish on the tip that emphasizes the straight, sharp light characteristic of LEDs! Additionally, side knurling has been applied to ensure light diffusion.
LEDs are susceptible to heat; using them in high-temperature areas such as inside headlights may shorten their lifespan or cause them to fail quickly.
Cannot be used for turn signals.
Wiring modification may be required to use with turn signal pilot lamps that are compatible with both left and right sides.
The base type is exclusively for negative-ground vehicles where the metal part of the base is negative.
*The image is for illustrative purposes only, and the design and specifications of the products shown may change without notice. Please be aware of this.
適合車種の情報は現在登録されていません。
