Stem Kit Z1/Z2

[Moriwaki 0532-201-000 Stem Kit Z1/Z2]
Compatible models: KAWASAKI Z1, Z2 Fork diameter: φ36mm
Fork span: 185mm
Fork offset: 50mm
Stem nut tightening torque: 10.5kgf-m
Handle holder (upper and lower) tightening torque: 2.7kgf-m
Stem/top bridge tightening torque: 2.2kgf-m
Handle holder to top bridge tightening torque: 3.9kgf-m
・This product is for racing use only. Therefore, do not ride it anywhere other than on a racetrack.
・For instructions on installing and removing standard parts related to the installation of this product, please refer to the service manual.
・Stem bearings are not included. Please use standard bearings or ones of the same dimensions.
・When tightening the handle holder, ensure the punch mark on the upper holder faces the direction of travel. Also, tighten from the front side in the direction of travel.
・The meter stay is compatible with Z1/Z2 types. Normal meters cannot be installed on Z750D/Z750FX-1/Z1000MK2 series and Z1-R series due to different meter stay shapes.
・Handlebar lock is not possible.
・After installing the stem, thoroughly check for any interference with other parts.
*The image is for illustration purposes only, and the design and specifications of the products shown may change without notice. Thank you for your understanding.